Question Locked

Unable to install OS on new PC

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I built a new box with the bare essentials. MB with onboard video, CPU, RAM Single IDE harddrive, SATA DVDRW drive. Put in my Win7 install DVD and started installation. Win7 could not find the hard drive. I then tried an old WinXP installation CD. That got me a BSOD. Then I tried "MaxBlast" since it was a Maxtor drive. The program stated the Hard Drive was bad. Switched to another Hard drive(formatted on another PC) and now all I get when I boot is "NTLDR is missing....press Ctrl-Alt-Del to Restart" I never get to my CDROM drive. Checked bios and priority is set to CDROM first, second & third. If I disconnect the Hard Drive, the CD installation starts but no hard drive to install to. How do I get around this error and install the OS? There is nothing on the drive so I should not need NTLDR yet.

2 replies

by oldbaritone

load drivers for your HDD.

Alternatively, try setting the SATA controller to IDE Mode.

Or maybe you can borrow/use a USB DVD to use for set-up?

This discussion is closed to new replies.