Discussion Locked

Uni to dual processor upgrade

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone used the trick of changing the setup.log files for MPS support than re-appling SP? Wanted to know if it works without flaws...pls advise asap.

5 replies

by lloyd

have tried ....failed big time reload/restore required
problem i found was with the sam in down grading service packs technet say's it's possible. as below
ARTICLE-ID: Q142660
TITLE : Upgrade from Uni- to Multiprocessor (Uptomp.exe)and Win32k.sys

NOTE: When you change to or from single or multiple processors, if you are using
Proxy 2.0 server on the same computer, you also need to replace the Ipfltdrv.sys
driver as well (%SystemRoot%\system32\drivers). The single- processor version is
36 KB in size and is located on the Proxy 2.0 CD-ROM in the
Msproxy\I386\Routing\Up folder. The multiple-processor version is 34 KB in size
and is located on the Proxy 2.0 CD-ROM in the Msproxy\I386\Routing folder.

i did have success on 2000though in fact very easy indeed so you may want to upgrade to 2000 server checking drivers etc then stick in the unprocessor driver in device manager

hope this helps!!!

by steven

Yes I did it successfully on two servers, one being the payroll server.There were a couple technet articles, the first one did not address the spk problem. The second one did.As I recollect there were 6 entries that had to be changed. A nice side benefit to come out of the procedure is that I ended up with an emergency boot os in a directory called winalt...

This discussion is closed to new replies.