5 replies
by docfoxer Accepted solution
by mr.wiz Accepted solution
by docfoxer Accepted solution
by hal 9000 Accepted solution
This is at the very basic level and you should be able to change the boot order from within BIOS to Floppy, CD ROM, HDD 0 and then the system will boot from the first device that it finds with a bootable unit on it.
In this case the Floppy with a Windows Start Disc will give you the A:> Prompt a CD ROM with an Operating System like XP will give you the option to press any key to start from the CD and then the computer will try to boot from the HDD which it's doing now but because of a corrupt files isn't allowing the Boot procedure to finish.
If you are using XP in some form you can do a repair install by following the directions here
Similarly if there is a hidden partition on that HDD you can use that to boot from by pushing a set of keys that are shown in the IBM Users Manual and reinstall the OS. This option was quite common on many IBM computers as it didn't require the shipping of any Install or Recovery CD's.
Col
by jordanspcrepair Accepted solution
Ok, the unmountable boot volume error has to do with problems in the file allocation table.
boot to recovery console through your windows cd, and run this command: chkdsk c: /r
this will fix your computer.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending