Discussion Locked

Upgraded to Win98, won't login properly

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a user with our corporate standard Win95 who needed to go to Win98 (for a software compatibility issue). I upgraded him in place (i.e., I did not reformat the hard drive and start from scratch) with a little difficulty (several more reboots than typical). Now he does not get the networking login when he starts up in the morning.
1. The network card works fine.
2. Primary login is set to Microsoft Networking in the Network properties.
3. If we choose Start/Log Off, we get the proper login box that should come up automatically at startup. Once he logs in here, he's back in business.

Why doesn't the network login appear automatically?

8 replies

by shanghai sam

Try to remove the microsoft family logon at the network properties. Then restart the machine and try it. And delete the *.pwl before you restart. Try if you get an login box. If you login to a NT server include the logon to domain and write down thedomain name.

Thank uuu

by it tech

Could be several reasons 1. If loging into a novell server try reinstalling the client. 2. If logging in to NT server insure the domain is correct. 3. On workstation boot up pause the machine for about 20 sec before WIN95 starts and give the nic time to go green if your are running a switched network. I use some intel PRO 100+ NIC's and the systems is ready for login before the card has finished negotiateing speed, duplex etc... If you don't want to do the pause thing, just enable the mem test in BIOS that should slow it down long enough for the NIC to set. Hope some of the info helps ya.

This discussion is closed to new replies.