But with a 30 GIG Drive it sounds as if it would have a IDE Drive in it. The problem here is that IDE has a upper Limit in BIOS that can be supported so sticking to the Double Rule is probably a good idea.
Depending on your existing HDD you may also need to consider the fact of how much power is required to run the drive. IDE Drives used to require very little power in the Milliamps range where as the newer bigger drives required more power so as this is in a NB it will have a shorter Run Time on Battery which may or may not be an issue for you here as well.
But you should first remove your current drive look at what type it is either a IDE or SATA and then read the sticker on the top of the drive to see how much power it requires. Then look at the specs of a suitable drive that you may be interested in and take note of the Power Requirements of that drive. Compare the two together and there is your answer.
As for if your system will actually use a 160 GIG Drive that is a different story if it's a SATA Drive there shouldn't be a problem but it may be limited to SATA ! Data Transfer Speeds however you need to research your BIOS IDE Drives Upper Limit if it is a IDE Drive.
The reason why the smaller 40 -80 GIG Drives are so much more expensive is the fact that they are now a Low Sale Item so they do not make as many and the costs of production can not be defrayed over a larger number of drives in each product run. So because they make less to be used in older Hardware they are much more expensive then the more commonly used sizes.
The reason why HDD Makers still make these drives is purely because they can not be replaced with new larger drives.
With many NB's that used the smaller 20 or so gig Drives they had a very low upper limit on the sizes of the drives that they could use. Sometimes a BIOS Flash will fix this issue but often it will not as there are no newer BIOS's available.
Col