Discussion Locked

Upon shutdown illegal operation, TaskMon

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Everytime I shutdown my computer. I receive an illegal op. error. TaskMon caused invalid page fault in module with several registers listed after.
This cauaes me to perform 1 extra step to turn off my comp. Have tried several things without being able to correct it. Do not know what TaskMon is.
Any help would be greatly appreciated

8 replies

by steve.doig

TaskMon monitors scheduled tasks. It is usually the first icon on the left in the system tray (window with bullseye).

Double click this icon, see if there are any scheduled tasks. If there are, try removing one at a time, shutting down afetr doing so. You may see which task is causing the problem.

Remember to add back the previous task each time you remove a different one, so there is 1 missing only - you know which one may be causing the problem.

If you isolate one, try adding back again. You may have to use different scheduling.

If no one task can be identified, remove them all.

G/L

by captblood

I went to site and downloaded all patch's and updates. No help there. Still have same problem.
Thank you for trying.

by veetz

TaskMonitor is a feature of Windows98 which maintains a log file of all the applications that you use when you start up your computer.

TaskMonitor then updates all your log files upon shut down so that whenever you attempt to scan your hard drive and then DeFrag it, all the applications that you use most often are placed up front so you can load them faster. That is all there is to this feature of TaskMon.

The problem you are experiencing is that you have some corrupted log files and TaskMon cannot update them properly.

To remedy the problem, go to My Computer and get onto your Main Drive. Click on the view tab and enable SHOW ALL FILES.

Then scroll down to Windows and click on the Applog folder. Double click on this folderso you can see all the log files contained in it. Then re-name this folder to Applog2.

Shut down your computer and restart. All the log files will then regenerate themselves as you use your computer.

Eventually you will be able to delete the Applog2 folder that you re-named.

This is all you need to do to remedy your problem.

VEETZ...

by captblood

Eureka!
By jove Holmes I think you've got it.
Thank you very much. I have lived with this problem for far too long. Nothing else I had tried worked.
Sorry it took so long to get back with an answer. Very busy last couple of months.
Once again,Thank you.
Vincent

This discussion is closed to new replies.