Question Locked

urgent... invalid system disk !

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi. i'm having a problem with my laptop. whenever i turn it on it says:

invalid system disk
replace the disk, and then press any key

the laptop has two users and is running on windows xp pro. i really need to solve this... i think the only solution right now is to format... but if you guys have a way to access my files... not only does my computer contain my thesis and projects, it also contains my aunt's office files and documents.
is there any way that i can still access the files so that i could back them up?

thanks, more power, and keep up the good work. ^_^

21 replies

by bart777

There you should find an adapter that will allow you to take that drive out and attach it in another computers USB ports.

With that you will hopefully be able to recover the data. If this doesn't work the only choice will be a recovery company and those are not cheap.

Give it a whirl.

God luck

by computerilliterate

thanks... i've thought about that... i just hoped someone might know a way that i could do just by myself... anyway thanks for the suggestion. i guess i have no more options except go to a computer store and hope it works.

thanks.

by m.a.s. matrix

There are several things that you can do to fix this or make a work around. Sounds like your MBR is corrupted or not there. Try putting in your XP PRO CD, make sure that your CMOS is set to boot from CD ROM first in the boot order. Once you boot from XP CD, select repair using counsole. Select your OS then at the prompt type fixmbr and follow the prompts. See if that helps. If not you can then go through the same process above to get to recovery counsole at the prompt type fixboot and then enter and reboot when finshed. If this doesn't work then head back to the recovery counsole and at the prompt this time type bootcfg /rebuild, what this will do is delete your old boot.ini file and put in a fresh new one. If this doesn't work try removing your hard drive and putting it back in, may be lose or not connected all the way. Next thing if that doesn't work would be to do what the member above suggested.

You can purchase external USB cases for laptop drives for a low cost then plug that drive in to a working computer and gain access to your files that way.

by computerilliterate

my laptop didn't com with a WinXP Pro cd... it has this product recovery program on the startup menu which formats and reinstalls the OS just like when it was newly purchased. but the thing is, it goes straight to formatting.

anyway, i already tried that. i borrowed an XP pro cd from a friend and tried to boot from cd. it did not detect the currently installed OS, so i did not get the repair option.

any other ideas would be greatly appreciated.

by thumbsup2

Make sure there is no floppy disk or CD in either drive. Check that there's no USB thumb drive plugged in too. Often that error message is returned because the system is trying to boot from something that isn't bootable. Most times, it's a floppy left in the floppy drive.

If that's not the problem, then you've lost the master boot record of the hard drive.

by computerilliterate

there's no floppy, cd, or any other removable devices. if i have lost the master boot record of my drive, is there any way to fix this? or maybe recover it?

thanks.

by ic-it

XP CD to boot to the Recovery Console (first R for Repair). Try these commands after it loads.
FixMBR
FixBoot
Chkdsk /R
Bootcfg /scan
Bootcfg /rebuild
Editted to add;
Either use the UBCD (Mycroft mentioned) or download the ISO for MHDD. Boot to it and run MHDD. Once it loads select the drive, Press F4, use the arrow keys to scroll down to Loop and repair. Use the Space key to turn each to Yes. Allow this to run overnite.

by older mycroft

Coz if there was a rogue disk in it, "invalid system disk" would be the result.

by computerilliterate

i have an external floppy drive... never used it though... i never connected it to the laptop.

thanks.

by jbafile

If you are working with files that are sensitive, and you aren't sure what you are doing...

Take it to your local computer repair shop after you have tried all the obvious errors that could be causing the problem.

Invalid System Disk usually points to hard drive failure if there isn't a "rogue" disk or bootable thumb drive plugged in.

by computerilliterate

i'll try to download the software ISO's you guys mentioned and hope it works. thanks for all the help. i'll let you know if it works.

by computerilliterate

i didn't get a repair option. if i proceed installing the OS, or deleted the partition, it will just replace my already installed OS and i will lose my files.

by rob miners

Might be a long shot but if you enter BIOS and change the boot order to start with the Hard Drive first.
HD
Floppy
CD

by rob miners

On your friends Computer do the following.
1. Format a floppy disk by using the Windows XP format utility. For example, with the floppy disk in the floppy disk drive, type format a: at a command prompt, and then press ENTER.
2. Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.
3. Create a Boot.ini file (or copy one from a computer that is running Windows XP), and then modify it to match the computer that you are trying to access. The following example works for a single-partition IDE drive with Windows XP installed in the \Windows folder, but the exact value in the [operating systems] section depends on the configuration of the Windows XP computer that you are trying to access:
[boot loader]
timeout=10
Default= multi(0)disk(0)rdisk(0)partition(1)\windows
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\windows="Windows XP"
4. Connect your floppy drive.
5. Enter BIOS and set the Boot order to Floppy HD and CD
6. Start your computer by using the floppy disk, and then if you are able to, log on at a command prompt.

Let us know if this works

by rob miners

The Hard Drive is being detected in the BIOS?
You haven't changed the settings in Bios for the Hard Drive.

This discussion is closed to new replies.