Hi Arvind,
I'm not quite sure of your question. Is the camera's installation software asking for your USB socket, or are you asking this for a reference reason?
If your USB socket is properly configured, you should not have any need to name the exact interface. Reason being: USB is hot-swappable (can add or remove devices without shutting down the PC). Your win98 OS supports the USB standard. When you plug in your camera, the system should recognize that a device has been added and will attempt to find the appropriate drivers to make it work. (Point of clarification: you should probably have your camera plugged in before you run the install CD, this may be the error you are getting. Namely, if the install CD is looking for an installed USB camera, but you did not plug it in yet!)
If you are unsure if your USB ports are working correctly you can plug in another USB device to see if it is able to work in your system. If you don't have another USB device, open the control panel and click on the System applet. Then select the Hardware, Device Manager tab. If your USB system is not running correctly, it should appear in the device manager and should not have a yellow circle with an exclamation point in it (indicates that something is wrong with that device).
If all of the aforemetioned appears correctly, and you are still having problems, I suggest contacting the manufacturer of the camera, as it is not a problem with your system if you performed all of the checks onthe USB system.
HTH,
Diamond:Dan