Discussion Locked

USB Device

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a pc with Windows 98 second edition. I am trying to install a USB Camera on it. In Device Manager under USB Controller it shows me Yellow mark with a device staus of ' NTKERN.VXD' driver is loaded. Try to fix it by Update driver like this. I have tried by updating driver, remove it & start windows again but result is same. I tried by reinstalling windows but same thing. How can i solve this problem. I also tried by deleting vmm32.vxd file from windows/system directory but same problem occurs.
USB is enabled in BIOS & detecting Camera.

Please give me an early reply.

12 replies

by coldman

Are you using the correct device driver for the camera?
From the look of it, it could be a wrong driver. 'NTKERN.VXD' should be a driver for Windows NT not Windows 98.
Get the correct Windows 98 drivers from the camera manufacturer.

by parbo

You are using the windows2000 driver. Windows NT doesnt support USB. If you dont have a win98 driver try downloading one from their website.

by ann777

NTKERN.VXD is used win Win95, 98, 98se, etc. depending on what devices you are using. The VXD file is not Windows NT.

I suggest that you disable any power management that you are using on this computer and retry loading the camera drivers. Remove the camera drivers, disconnect the camera, and then reboot, reload the drivers (without the camera connected) and then connect the camera.

It's also important to verify that the camera is operational. Have you successfully connected it to another computer? If not, the camera itself may be bad and corrupting the driver.

by jminard

I have gotten that message on numerous machines and believe me the first time I was like "I am not even using NT" Slammed my head on the wall millions of times before I finally figured it out by scouring the internet for days.

by rindi1

Do other USB devices work? If not you may need a current USB driver from your mainboard vendor. Check on the internet on your mainboard or PCs vendors homepage for an updated driver.

This discussion is closed to new replies.