Discussion Locked

USB Driver Conflict

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there a solution to a problem that deals with the USB device driver for Windows 98 Second Edition? Recently noted that once i got a USB device conflict in the system manager, i could not reload the driver. Removing the offending USB device driver and program according to manufacturers documentation did not help. Removing all USB devices did not help either. The reinstallation of Windows 98 Second Edition did not help either. The only method that worked was that the Windows 98 Second Edition had to be reloaded after wiping out the hard drive(clean installation).

2 replies

by tlpayne

I hope this helps. Insread of re-installing win98 you could have gone into control panel and deleted the USB root hub and usb host controllor. Reboot your system and let windows find and reinstall the two devices. Next you would ensure you have the latest usb drivers from the manufactuer. After installing the drivers if there was a conflict again you could use the version conflict manager program to remove and or change drivers. Another problem could be conflict between windows and the BIOS
that involves the USB host controller. Refer to MS article Q250635 for that one. So good luck.

This discussion is closed to new replies.