Question Locked

USB flash drive not recognized

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have been using A-DATA 16G flash drive over a year (on Win XP). I have lots of data in it and recently its not getting detected in any desktops/laptops. I have hooked up the flash drive to desktop while bootup and in the meantime the desktop hung up. I removed the flash drive from the desktop when it was hung. Does that cause any problem to the flash drive? Now that drive is not getting recognized in any desktop/laptop. Is there a solution to fix this? Any help would be appreciated.

5 replies

by ogrfnkl

You say you were booting the computer when it got hung--were you booting from the flash drive in question? If not, it is very unlikely the drive could have been corrupted in the hang, since it wasn't being written to at the time. Try looking for the drive in the Disk Management console (Start->Run and then type in "diskmgmt.msc"). If you can see it in the list of devices, right click it, choose "Change drive letter" and assign the next available letter (typically, the one right after the CD/DVD drive; if it is already set to that letter, change it to a different one, then return to the window and set it back to the desired letter). Shut down and reboot the computer with the drive connected to the USB port. If the drive itself is OK, it should now show up in Windows Explorer. If for some reason you can't see it in Explorer but it IS present in Disk Management, you can right-click it and choose Open, which will bring up its contents in a new Explorer window. Good luck.

by svp2000

Hi ogrfnkl,

I tried out all possibilities, starting from disk mgmt to removing all usb tools/drivers to a fresh OS installation. Other USB are getting recognized and accessible. But this one is not. My bad, I think I have lost all of my data from this flash (its really flashed me)

Thx

by ogrfnkl

Yes, if your other drives work fine in the same usb port, it sounds like this one is fried, unfortunately. I'm sure you'll be backing up your data more regularly from now on...

by computechdan

sounds like you use this device alot, perhaps the contacts are worn, or the metal surrounding them has bulged from repeated use

check for trash, dust bunnies or such in the end of the device, and make sure it is a perfect rectangle.

i had one that i revived by slightly compressing the end so it would make a tighter connection, copied my files then retired it

This discussion is closed to new replies.