Discussion Locked

USB Hub Device Manager settings

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

One customer has a USB hub with about 5 USB sockets plugged in. The one Hub output socket goes to PC into a USB port the other PC Base USB has a USB Mouse connected.
Anyway many thinkgs cause PC to lock up. My guess is contention.

Checked DeviceManager

Mouse has THREE
HID Compliant mouse
HID Compliant mouse
Microsoft USB IntelliMouse
USB has THREE
General purpose USB Hub
Intel 82371AB PCI to USB Universal Host Controller
USB Root Hub

Never encountered these Hubs, but three on each seems excessive.

Is this normal
Alan

5 replies

by chewbaka

Hi,

No, that indeed is NOT very normal...

One thing to try, if you haven't already is to remove devices from the DEVICE MANAGER, and allow Plug & "Pray" to re-detect them.

I strongly urge you also get the latest device drivers, and update them...

Also, what O/S is your customer using? Windows 98? If so, SE? Is all up to date? USB can be VERY intimidating, as it was not perfected, as it should have been. I have problems when I simply try to plug my Kodak Digital camera in one USB port, while my Logitech WebCam is in the other.

It's all about the IRQ's, I think...

Also, check the devices that are being used with the USB hub, and make sure you have all the latest drivers for each device.

E-Mail me, if you have any further questions... I hope I have been of SOME assistance...

by dcosgrove

Just one step further. Boot to safe mode and see how many mice are listed there, I bet more than three. It is not abnormal to have three devices under usb controllers. one is the controlle itself, one is the root hub on the main board and one is for the add on usb hub. Even a keyboard or a monitor with extra usb ports counts as a hub. But any way, go into safe mode and check all the categories for dupes and if you mouse works correctly with the drivers windows finds, I dont usually use third party drivers.

This discussion is closed to new replies.