Discussion Locked

Using IPX protocol on a 5 vlan network

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
We have a Windows NT4 network spread over 5 local buildings and vlans. At the moment we use TCP/IP as the only protocol. My question is could the IPX or Nwlink protocols also be used over this setup. There is no access to the internet or any other network required. Thank you.

5 replies

by oskiller

As long as you are routing and have the routers setup, you can do this. IPX is routable. The only disadvantage is, from my experience, is that IPX has a slightly larger overhead in terms of network bandwidth.

by some guy in seattle

Agreed. IPX is a rather chatty protocol in that devices broadcast their services on the network to let other devices know what they have to offer. This does add to the network traffic load and tends to go up exponentially as the network gets larger.

On the other hand, there's no subnetting to worry about!

This discussion is closed to new replies.