Question Locked

Using MS outlook to send/receive emails when using Verizon broadband card

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a PC5740 Verizon Broadband card that I use to access the Internet when out of the office. I still can't figure out how to set it up so that I can still use Microsoft Outlook to send my emails out. When I open MS Outlook, my emails will come in from my POP3 but I can never successfully send emails out. I know this has to do with the email settings and all that and I just cant seem to figure it out. Anyone have any ideas or answers for me please???

5 replies

by thumbsup2

Most ISP's will not relay outgoing email. If Verizon gave you an email account along with the broadband service, you need to use THAT account to SEND email while using their broadband card. They will let you download POP3 email from any mail server, but not send.

When out of the office, you need to use the SMTP settings for the Verizon account and not your office account. You can leave the POP3 settings the same. Just change the SMTP settings.

You can either change the settings every time you're out of the office, or create a second profile using the company POP3 settings mixed with the Verizon SMTP settings so that all you have to do when you start Outlook while out of the office is choose the correct profile. Set the office as default profile, but don't allow it to always use that one. Make it ask when Outlook starts. The two profiles can share the same PST file, which is where everything is stored (mail, calendar, contacts, etc...). But, you have to set the correct data file in the second profile.

by johnjackson1132

I recommend not swapping back and forth between, your "company internet" and your "wireless card internet".

I don't know about your card, but ours, you get basically unlimited bandwidth, for XX dollars a month.

Doesn't make sense you would use both, unless you have minutes on your air-card.

If that is the case, you'll need two profiles...that is a bit more confusing to setup.

by johnjackson1132

'ello Stacey,

Follow the steps below...

1) Go Into Outlook
2) Select "Tools"
3) Select "E-mail Accounts"
4) "View / change existing e-mail accounts should be selected"
5) Hit "Next"
6) Hit "Change"
7) Hit "More Settings" found at the Bottom Right Hand Corner..
8) Select "Outgoing Server" tab at the top.
9) Check "My outgoing server (SMTP) requires authentication".
10) Check "log on using"
11) Then you need the account name and password, Verizon will provide for you, when you follow the steps listed below".

This is all accurate step by step if your using Microsoft Outlook...=)

2) Contact Verizon. Get the "Verizon REP" Phone # from your IT Department, or the manager whom maintains all the cell phones, etc..
a) You need Verizon to setup your Wireless account, which they WILL do over the phone with you.

Call them and tell them, your setting up your PC Wireless Card, don't use an automated machine, get in touch with a person, they'll do it for you, for free.

You need to setup your account with them and the card, and they will ask you for the phone number of the card.

Michael

by johnjackson1132

If you have unlimited bandwidth, which 99% of the Wireless cards do...do what the VPs and TMs do where I work, Just use your card! There's a good chance it's quicker anyways.

if your going to just use your card, use my method, if you are using both internets...

You'll need to do what I told you above but twice, except...

so it's like...

One Profile is done with steps above..

and the other is done, except you would use the "My SMTP server settings are same as my Incoming bla bla"...for the second profile. Then swap back and forth.

All confusion made easy, just use your card, and go with my method!

This discussion is closed to new replies.