Discussion Locked

using smc router

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have nt 4 server and trying to use smc router to get on internet. Presently using 56k modem and have AOL and netzero on same server. The smc router says it can use a 56k modem. After setting up router IT will connect to isp then after 1 min drop out. while connected I then try to use the netzero or aol interfasce to connect but still drops out, what I m I doing wrong. What do I need to do to make it work. For the Netzero dialer i have it set to use lan connection and Aol to use tcp isplan connecton.. What steps do I need to take.. Thanks

1 reply

by mckaytech

It would be very helpful to know the model number of your SMC router. That having been said, it sounds like your router is not set up properly to authenticate to your NetZero or AOL account.

I assume that your router has a built-in modem and connects to your computer with an Ethernet cable. If so, the router has to dial the access number and then supply a userid and password accepted by AOL or NetZero to establish the connection. Because both NetZero and AOL install software that make extensive changes to the TCP/IP stack, I'm not at all sure that this will even work.

But if you can give us a model number of your router and describe your physical setup, I think you'll get a more helpful answer.

paul

This discussion is closed to new replies.