Discussion Locked

VAX Pathworks won't work one W2k PC

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've got a single w2k workstation giving me problems connecting to older version VMS server through Pathworks. Connections have been sporadic and slow. I am able to use the same login account on another workstation that had previously never been logged onto by the user and it works fast and perfectly. Other users on other workstations are working well. If I log onto the problem workstation with a different account such as administrator it seems to work slightly better but is still sporadic and slow. It seems to be just the problem workstation and not the account being used. I've reinstalled TCP/IP protocol, tested different users, but can't figure it out. Any help is appreciated!

8 replies

by curacao_dejavu

check your ip/gateway, dns settings.
remove all protocols that you are not using.
and reinstall sp4.
check the eventviewer just in case something might not be starting up.

Leopold

by wessir

Ip/gateway,dns settings are correct. Only protocol is TCP/IP. Re-installed SP4 but still the same problem. I suspect cached passwords??? How can I clear them so I see the SMB login screen?

by curacao_dejavu

create another administrator account on the computer and login as that account to see if it is a profile problem or a computer problem.

if it is a profile problem delete the profile from (r-klik my computer , properties, profiles.) and then delete in document and settings that account too.)

if it does not work, its a computer problem obviously.since the previous advise did not work, I would suggest to install the latest driver for your network driver.

Leopold

by wessir

tried those suggestions but no luck. I have narrowed it down to the pc. not really sure how to proceed.

by curacao_dejavu

install sp4 and then the additinal security patches via windowsupdate. If those dont help, backup the data and reinstall the operating system.

Leopold

This discussion is closed to new replies.