3 replies
by captl Accepted solution
by older mycroft Accepted solution
by balge Accepted solution
hi
check list -
LCD Failures
Symptoms:
- The laptop appears to start as usual but the screen is black, if you move it, it turns on and works properly.
- Failed cable.
- The laptop appears to start as usual but the screen is very dark, although it changes colour a little and you can see a very feint image.
- Failed inverter or cable 90%/10%.
- Immediately after starting the screen has dark pink/red tint and turns dark after a few seconds. - Failed backlight.
- The screen flickers a few times but then turns dark, if you move it or tap it lightly on the sides, it flickers again. Failed cable or LCD 50%/50%.
- Screen is either black or white (no picture) and external monitor works.
- Failed cable or LCD 30%/70%.
- There are stripes on the screen (either vertical or horizontal) that change when you move the screen or tap it lightly on the sides.
- Failed cable or LCD 10%/90%.
backlight?
cheers!
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending