Question Locked

Vintage 8-bit ISA Card - what am I!?

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can anyone identify what this card is!?

It is an 8bit ISA card which I think is an ethernet adapter as it is using the DP8390 chip. But it has a 14-pin micro-D receptacle connector.

Is this some unheard of ethernet standard or is it a proprietary system that has borrowed 802.3 standards?

I think it came from an old Groupe Bull PC.

17 replies

by oh smeg

Just remove the space from between the photobucket and the .com to get a working link to a picture of an old Token Ring dongle that I would imagine plugs into this card you are asking about.

http://i271.photobucket .com/albums/jj121/HAL9000_photo/DSC03263.jpg

Col

by dmr80620

That transceiver is 10base2 (802.3), not Token Ring (802.5).

by Member 28176811

It's a Thick Ethernet Transceiver
Not seen many of those since the late 1980's/90's, it is an interface for what was commonly known, in the early days of Ethernet, as Thicknet(10Baseband5)

by ariesghost

What is the FCC ID Number on the device? Have you tried going to their website and looking it up? Or googling it?

by beadlebodle

Thanks everyone so far. I have tried googling all the numbers on the PCB and chips; it seems to be some kind of network card but the connector has me fooled, It's none of the ones anyone is thinking of. There's now a picture at http://picturepush .com/public/7829062 and http://picturepush .com/public/7829091 - take spaces out before the dot com to view.

by jwizardc

I'm about 87.224% certain that you have a GPIB (General Purpose Interface Bus, also called the HP-IB, and IEEE 488) card. GPIB was (is?) used primarily to connect various test equipment together - oscilloscopes, logic probes, frequency analyzers, etc.
My experience with GPIB is that it is a true pain in the watzis to set up, but once I got it ironed out it was nearly bulletproof.

-jimc

by beadlebodle

Yep - this is 14 pin centronics type micro D. I also honed it down to GPIB but I thought they were only built into test kit; also does this mean GPIB was based on Ethernet standards seeing as the processor chip is an 802.3 chip.

by george.ancestry

jimc has nailed it.

Can't tell clearly from the pic, but the DB connector looks to be a centronics-type connector, which would be common 'back then' for peripherals like 'scopes, etc.

If it was a net card, the connector would have been a DB-9 pin-type connector

by mjd420nova

Doesn't look like an IEEE 488 connector. A set of dip switches would be apparent for addressing. The other choice would have been a joystick/midi port. until I saw the coax BNC connector. That would put it in the IBM 3270 interface/network card for a PC.

by gdburton9

is that Col was right, (even before he saw the photos!) but the designer decided he needed to use a smaller non-standard connector to keep to suit the low profile card. Using the Apple specific AAUI was a stroke of genius/idiocy which does not surprise me from a probable French design shop. Perhaps an early reach out to bridge the ever widening gulf between the two camps ! :-)

This discussion is closed to new replies.