8 replies
by yotraj Accepted solution
by older mycroft Accepted solution
Your comment of "[i]Kodak offers only a firmware update, and it contains no driver.[/i]" clearly indicates that you don't understand what a Firmware Update is.
The reason that the Kodak download doesn't contain a Driver, is that the Firmware Update - [u]updates the internal driver within the camera itself[/u] which, I anticipate, would then make the camera compatible with Vista.
I might be wrong but I've seen Kodak do this sort of thing before.
by yotraj Accepted solution
BUT, whereas the puter will see the device in device manager, it will see it nowhere else and since it won't see it anywhere else, I can't apply the firmware update either! for instance, here's their instructions for installing the firmware : 1 - PREPARING TO UPDATE THE FIRMWARE
------------------------------------
To prepare the camera
1. Copy all picture files from the camera memory card to your
computer hard disk and then delete the pictures from the card.
The camera memory card must provide sufficient space for the new
firmware files to be copied.
2. Place fresh batteries in the camera. You want to make sure that
the camera does not lose power during the update. If you have an
AC power adapter, use it during the update.
Problem is, I can't SEE the camera even in Explore.
Many thanks for your reply though.
John R.
by older mycroft Accepted solution
You've posted the answer but still cannot SEE it -
[i]"1. [b]Copy[/b] all picture files [u]from the camera memory card to your
computer hard disk[/u] and then delete the pictures from the card.
The camera memory card must provide sufficient space for the new
firmware files to be copied."[/i]
[b]You are required to REMOVE the memory card from the camera!![/b]
Here's the instructions:
http://www.kodak.com/global/en/service/digCam/dc290/ownerManual/ch18.shtml#79242
The Kodak instructions assume you have a card reader. You use the card reader to transfer the pictures (that's what I do anyway) from the memory card, then you wipe the memory card and apply the firmware update to that memory card.
When you place the memory card back inside the camera - you have updated the camera - it reads its new instructions from the memory card.
[b]The devil is in the detail. When you read instructions you need to actually READ THEM.[/b] ;)
[i]Edit for LINK.[/i]
by yotraj Accepted solution
by yotraj Accepted solution
by older mycroft Accepted solution
"[i]And I agree that Kodak (more or less) says you need a card reader although they also allude to being able to use the "KODAK DC290 Camera Mounter software or a card reader." that from the instructions that come with the firmware upgrade. I do a site search for camera Mounter software and find none for my camera![/i]"
Firstly - KODAK do [b]NOT[/b] 'more or less' say anything. They clearly ([i]and surprisingly articulately for KODAK[/i]) [u]stipulate[/u] that you have a clear choice: either remove the CF card and place the firmware update on it before re-inserting the card in the camera ~or~ make use of the KODAK DC290 Camera Mounter software.
"[i]I do a site search for camera Mounter software and find none for my camera![/i]"
[b]You won't find it doing a site search because the software you are looking for is ALREADY INSIDE THE CAMERA.[/b]
[u]As the KODAK instructions clearly state:[/u]
Copying Files Using KODAK DC290 Camera Mounter Software
1. Turn on the camera and set the "Mode" dial to "Connect".
2. Navigate via Windows Explorer or My Computer to the System folder within the camera memory card. If the System folder does not exist, you will need to create one.
3. In the folder on your hard disk where you copied the extracted firmware files to, select the following files:
d2900104.bin
rs290104.bin
update.cam
update.crs
4. Copy (or drag) these files to the camera System folder.
5. Proceed to section 3 "Running the Update Application on the Camera." - [/i]dah dah, dah dah, dah dah.
Clearly KODAK suggest using 'KODAK DC290 Camera Mounter Software' method, assuming that the PC can actually [b][u]SEE[/b][/u] the camera when connected via USB cable - in this instance that is not an available option for you since Vista cannot see the camera - that is why you need the Firmware Update.
You can pick up a USB Multi-Card Reader for almost pennies these days.
Or you could take the rather obvious alternative route and STOP using the USB hook-up! Just transfer your photos using the card reader that you're going to have to buy anyway.
[i]Edit for layout[/i]
by yotraj Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending