Question Locked

VPN-branch office to main office via DSL connections

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My client has a main office with internal LAN IP addresses that are static 10.x.x.x and a centrally managed T-1 that I cannot touch for VPN use. I will use a DSL connection at the main office with a modem in bridge mode. The branch office will also have DSL. I want to use a VPN client on the branch office site, and connect to the internal network at the main office. The DSL modem at the main office will be in bridge mode and connected to a Linksys router. What do I need to do to get the Linksys router connected and/or passing VPN traffic to a 10.x.x.x IP address on the LAN? I am not sure if I need a bridge device between the Linksys and the internal LAN, or if I can configure the Linksys to handle this. If I need to purchase a specific device to make this easier or more reliable, my client is open.

2 replies

by dedlbug

especially if it is a business class router.

The simple answer: Open "TCP port 1723" on the router accepting the VPN connection and forward it to the Server IP address. This will work for PPTP connections with a RRAS server (Routing and Remote Access Server) If your clients are all static IP's, make sure your settings are correct so the client can obtain an IP address.

What Server OS is in the Main office? Configurations on that server will probably need to be made to accept the clients.

This discussion is closed to new replies.