Discussion Locked

VPN connects but can't ping network

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Any help on this pain would be great!
I can VPN winxpsp2 into sbs2003 via cisco 501 with noted connection. IPCONFIG /all and my dhcp address shows up correctly the subnet is 255 x4 internal network is 255 x3 and my default gateway is my dhcp supplied ip. netstat shows connection but I can't ping server by name or ip nor any other machine on network. Guesses?

8 replies

by bfilmfan

Can you ping the DNS server itself?

The DHCP server?

What ports are blocked on the firewall?

by lmayeda

Sounds like you have a conflict with your antivirus/firewall software. I suggest uninstalling your Antivirus/firewall software ... test to see if you can ping the network then re-install. I had the same symptoms with McAfee on one of our systems. Don't know the exact cause of the problem ... only what worked to fix it.

by flschmidt

No I cannot ping either by name or by IP. The firewall is set to a basic config did you want an entire listing?

by p.j.hutchison

Enable ICMP on Firewall to allow ping messages through. Its a different option to other TCP, UDP packets.

by d_v ant

Just to clarify your IP settings, do they look similar to this?

Dhcp Enabled. . . . . . . . . . . : Yes
IP Address. . . . . . . . . . . . : 10.10.10.54
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 10.10.10.54

From your description, this is how I assume it would look.

by flschmidt

Yes that is exactly how it appears. Meanwhile the internal network would be similar to 10.10.10.34
255.255.255.0 10.10.10.1

This discussion is closed to new replies.