Question Locked

VPN Tunnel established still can't RDP

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Sonicwall SOHO3 at our office and a Linksys WRV200 router at home. I have established the VPN tunnel (at least it shows as being active), but cannot ping any of the IP addresses from home to the office network. I have checked, re-checked and triple checked the settings but can't find anything preventing the 'completion' of this tunnel. Anyone have any ideas? I'm not overly versed in VPN's so be gentle! :)

3 replies

by chasemixon

I work with a group and we have netvanta 2300 with 59 vpn's set up to the different locations, all the ones that use cable modem service for ISP work wonderfully, the 3 that use DSL service do exactly what you are talking about, I can talk to the routers from the office but that's it. The computers at the locations can not talk to the office nor can I talk to the PC's? best I have been able to tell, it's something with the PPPoE auth maybe? do you use DSL service?

by gm

I have a VPN tunnel with Linksys VPN routers at each end connected to the internet through DSL Modem bridges. Both routers indicate that the tunnel is "connected", and I can access the remote admin web page for each router from either end. At each end of the tunnel I have a Windows Workgroup on computers running WinXP Pro. But I can not ping any computer from "the other end" of the tunnel. How do I establish connectivity so each computer can "see" all the other computers at both ends of the tunnel?

This discussion is closed to new replies.