13 replies
by azizhakim
The primary function of dhcp is assigning ip
addresses to requesting clients.Since dhcp is assigning ip addresses we are assured we in same subnet.Next comes host name resolution,Before i get into resolution,you have an option in your advance properties of
your dhcp server you can tell dhcp to register dns to clients that don't support ddns.If you have wins running enable that option in your dhcp options to point to wins for name resolution.That should resolve naming resolution,if it still does not you can include a static entry on each server either hosts or lmhosts or through dhcp options,also check correct entry on nt4.0 server to dns registration and wins.That should correct your host name resolution,perhaps you can show more light if you are indeed using wins or dns then we can go further,Hope that helps
by el guapo
I'm using WINS & DNS and I've included those in the DHCP options already. There is only one subnet.
I don't know about the name resolution, but the NT4 box can't get an IP from the DHCP.
by bohicam1
If you are running win2k in native mode, it will no longer recognize any computer that is not windows2000. If you are still in mixed mode, have you tried putting an entry for the dhcp server into the host and lmhost files in your winnt server? Thesefiles can be edited and you can find them in c:\winnt\system32\drivers\etc\
Good luck!
Mike
by el guapo
by davieboy
by traqs
Which server is the DHCP server, and which one is the client, win2k or NT4?
Verify that your client machine is getting an IP address from the dhcp server (ipconfig /all, and check that the dhcp server specified is the correct one).
If not, then try to give the client an IP address that is in the same range as the server, and do a ping test (ping x.x.x.x where x.x.x.x is the ip address of the server) If this does not work, then check your network card, it may be faulty. try changing it.
by el guapo
by avswamy
by el guapo
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending