Discussion Locked

W2k can I change the default VPN IP Port

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok, here's the scenario:
At work I wish to access my home network, which is connected over a cable modem and is running a Windows 2000 Network (Native Mode). The Win2k server functioning as a NAT router also has VPN turned on for the incoming connection.
The problem is that my work firewall only allows packets out on certain ports (any other ports are auto-blocked). I need to know a: How to configure the VPN client to connect via a different port number, and b: how to tell the Win2k server to listen on that port number for incoming VPN connections.

Is any of this possible? For the sake of the question, assume that ports 1723 and 47 are both totally blocked by the office firewall.

Thanks!
Brian

1 reply

by cdeclercq

Hi
YOu have to modify this throught the registry. W2k does not support port specific tunnels, as this is a security risk. it changes. Buy you can force it.
SOFTWARE\Policies\Microsoft\Windows\IPSec\Policy\Local\ipsecPolicy{-longnumber-}

The PPTP control connection is between the IP address of the PPTP client using a dynamically allocated TCP port and the IP address of the PPTP server using the reserved TCP port 1723.

You basically have to get that port opened on your server. Twiddling with the registry seems to work for me. It took a lot of annoying days to get it right.

The MS Kbase articles are:
How to Configure IPSec Tunneling in Windows 2000 [Q252735]

This discussion is closed to new replies.