Discussion Locked

W2K Domain vs. WINNT 4.0 Domain

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does anyone know how to access resource on a WINNT 4.0 Domain from a W2K Domain. Is there any specific kind of trust or backward compatability?

6 replies

by the professor

You must create a trust manually between an NT and a 2000 domain. Trusts between NT and 2K conform to the NT specification (i.e. one-way, non-transitive trusts).

You configue the resource domain to trust the users domain and configure the permissions between the domains with global/local groups.
WinNT domains do not support universal groups.

To configure trusts in Win2K, use the Active Directory Domains and Trusts applet from the administrative tools menu.

by the professor

Mikey is correct that there are two modes for WIN2K, mixed and native. However, if there are legacy (winnt) PDCs on the LAN, as in this case, the win2k server should have already been in mixed mode. A WIN2K server should only be converted to native mode after the last WINNT server has been converted to WIN2K. Also, once the network has been converted to native mode, there is no way to change it back to mixed mode.

by mikey_tech_support

The professor is talking about the trust relation that need to be set up, but there is two kinds of DC for w2k, Mixed mode and native mode. In AD you can right click and set it to mixed mode. Mixed mode will act like NT4 and Native mode is for w2k only.

This discussion is closed to new replies.