Discussion Locked

w2k ntfrs accessing floppy after sp2

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have recently installed sp2 on a w2k Server which is a domain controller. Ever since then, the a: drive is accessed once every 5 minutes. The ntfrs log is showing the following line (context of 1 line either side):

:S: ReplicaCs: normal wait
WARN - GetvolumeInformation for A:\; WStatus: ERROR_NOT_READY
:DS: Computer FQDN is cn=eveleigh,ou=domain controllers,dc=clover,dc=local

so it would appear that ntfrs is, within "FrsBuildVolSerialNumberToDriveTable", trying to access A:\ and can't as there is no disk there (which normally there won't be).

I've searched (here, groups, MS kb), but cannot see an obvious way of telling ntfrs to leave "a:" alone. This is more of an irritation than causing me a real problem, but I'd still like to get rid of the floppy drive jumping every 5 minutes!

Any clues or suggestions would be appreciated.

3 replies

by sativocomputerservices

Somehow or another, file replication service has been initiated on that floppy drive. You need to find out where that is configured so you can disable it. You can do a quick scan of your offline file folders and it should be there. My guess is onthe server because very few people share the server's floppy drive. If you are busy like me and want to buy yourself some time, here is the registry location for the short interval polling. Change this to any minute interval you want, This cuts down considerably on disk IO on your server as well.

Hkey_Local_Machine\System\CurrentControlSet\Services\NtFrs\Parameters

DS Polling Short Interval in Minutes "DWORD"

This discussion is closed to new replies.