Discussion Locked

W2K Pro on NT4 PDC excessive traffic

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
W2K PRO sends lots of traffic on network. Watching network with Sniffer shows the stations broadcasting. First how can I stop the broadcasting? Second, some of the PCs are connecting across state and not seeing the PDC\BDC on campus? (Using nbtstatshows this)Do I need a W2K DNS or PDC so the PCs will stop broadcasting? Any help aprreciated

9 replies

by jb007

You have to ask yourself why would it need to broadcast?

Usually this may suggest that it cannot resolve the names of computers it is trying to access using the following methods:

Wins
DNS
netbios cache
hosts
lmhosts

Finally it will broadcast.

Other causes of broadcasting may be:

a) browser elections (check eventvwr)
b) broadcasting applications installed on the machine(searching for other machines)
c) incorrect ip settings on clients (wins, dns, gateway)

Finally, your remote clients might find life easier if they have a local bdc to validate too instead of coming across your link and hoping to find the pdc or bdc. That way you can minimise some of the traffic coming into your lan.

hope this helps,

jb

by mebudman

Name resolution varies by the type of parameters you set in your tcpip settings.
If you set up WINS entries in TCPIP you default to hybrid mode which resolves the names in this order
1. Netbios cache
2. WINS Server
3. LMHOSTS
4. DNS
5 Hosts
finally it broadcasts.

If you do not have wins entries set up you default to broadcast mode
1. Netbios cache
2. Lmhosts
3. Broadcasts

The way to eliminate a vast majority of the broadcasts is to setup a WINS server and have all computers setto use and register themselves with the wins server. You can not eliminate all the broadcasts, because that is how the PDC/BDC browse masters request machines on their subnet to respond. Another the way to eliminate broadcasting is to remove NETBEUI from all computers. Netbeui is a broadcast protocol.

Hope this helps.

by debbie_wright

Network traffic has been fine until we added W2K Pro boxes on the network. Never had PCs going across the LAN seeking something?? The Sniffer gives error that 'Station not in Domain Computer List'. There is a Primary and Seconday WINS and DNS set up. W2K will only go to PDC(NT4) to authenticate. How do I get W2K to stop seeking and cut down traffic? Rest of network fine only W2K Pro attaching to NT4 network problems...Thanks

by debbie_wright

No this has not been resolved. Apparently, W2K Pro defaults to looking for entries in DNS. It will look all over the WAN until it can find a PDC. There are no W2K DCs only NT4 DCs. An entry will need to be put into the DNS server for each W2K WKS. Right now the only entries are for servers and the WKS resolve to the WINS server. Stopping the W2K from looking for the DC would cut down the traffic. Still hoping for answer, even Microsoft cannot resolve this one.

This discussion is closed to new replies.