Discussion Locked

WAN over 128k burst frame relay (UK) ?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have to set up a WAN across three geographic locations linked by a 128k burst frame relay. We have a Cosco Router 2620 for Head Office and a twin processor Primergy470 Server with 500Mb RAM and Win2K Advanced Server. We can equip the 2 branch offices with small servers (between 4 & 10 workstations each site) with Win Small Biz Server 4.5 or WinNT . Most data colud be held on each remote server with both way synchronisation of changed files overnight, releasing daytime traffic for emails and other smaller traffic e.g. holday forms!
The Head Office has about 15workstations and will have ISDN with Surftime for Internet but we would not wish to permit active Internet traffic to remote offices.
How best do we sort this out and with what combinations of software otr parts thereof. We also have Exchange Server4.5 (?)
Many thanks in advance

1 reply

by mckaytech

With a 2620 router at the Head Office, all you will need there is a CSU/DSU to interface with the frame relay drop and you'll be set.

At each branch office, you'll need a CSU/DSU (could be a module in the router) and from there you could use either a router or setup the servers as multi-homed and use them for the routing. Personally, I prefer the hardware router, but when cost is an issue, a properly configured multi-homed server can work just fine.

Beyond that, the only recommendation Iwould make is to carefully consider whether Small Biz Server is really the right product for the branch offices. It is a very cost-effective package for the single-server environment, particularly when you need SQL Server, Exchange and/or Proxy Server in addition to NT Server. However, it can only be set up as a PDC and cannot participate in trusts so it doesn't work well on a WAN. Generally for the type of WAN you are proposing, I would recommend a single domain model with the PDC at the Head Office and a BDC at each branch and you can't accomplish that with Small Bus. Server. However, if you already have enough Exchange licenses, you could easily run Exchange on NT at the branches and end up with less cost than 2 SBS licenses.

As far as the Internet traffic issue, that can very easily be addressed with an access-list on the router at the Head Office.

regards!

paul

This discussion is closed to new replies.