Discussion Locked

Water spilled on my laptop

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I accidentally spilled water on my laptop. Soon after, I started to here a fizz sound, hopefully not the circuits burning. I then immediately turned everything off, took the battery out and tried to dry everything I could. I then put it in front of a fan the entire night and woke up to try to see if my Dell Inspiron 6000 was ok. When I turned it on I noticed that it was a little slower than usual. Then a screen popped up saying "Generic Host Process has encounterd a prblem and needs to close", and it refers to Win32 services. When I click to see what the error report contains, the error signature states:

szAppNane: svchost.exe
szAppVer: 5.1.2600.2180
szModName: wuaueng.dll
szModVer: 5.8.0.2469
offset: 007cb9a

Im not sure if this has anything to do with the water being spilled, but why would this show up, my laptop was running perfectly before? Once a choose not to send the report, I try to use my laptop normally, but it will not let me, it will take forever to open something, and sometimes it doesnt even open programs. Is there anyway this can be fixed? If the water did burn something, is that fixable. Please, any help that you can provide will be very appreciated.

Thankx

1 reply

by mjd420nova

This is a question, but I'll try to help here. The Dell Inspiron 6000 is pretty complex, and complete disassembly is required to cure all the errors you're seeing. The hard drive, CD/DVD drive and memory along with the WIFI card need to be removed. Remove the keyboard and then extricate the motherboard. The heat pipe/heatsink need to be removed and the processor unmounted. I use Winddex all purpose cleaner and a short bristle acid brush to clean the entire board and then flush with clear water. Then a can of non-residue de-greaser/cleaner needs to be sprayed on the board to flush all the water away and allow to dry. Reassemble the unit and try it out. The errors are from all the contamination that is bridging control lines and data line to and from all the components. All kinds of errors can result, many untraceable or repeatable. Good luck.

This discussion is closed to new replies.