Question Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recentley switched cases on my tower and dont seem to remember where the Power L.E.D, the Power S.W., and the H.D.D.L.E.D plugs are supposed to be plugged in on the e-machine motherboard. Can someone please help. E-mail me at number_1_momie@yahoo.com
3 replies
by number_1_momie Accepted solution
Clarifications
by mdfreeman Accepted solution
Look closely on the motherboard for a group of pins marked fp connection, front panel or something like that...these are the connections your looking for. Go to the motherboard manufacturers website and download the manual, it should tell you where it is at. The LED connectors are polarized and must be connected properly to work. If you connect them and they don't light up, simply reverse the connection and they should work. The switch connectors are not polarized and will work either way.
by thechas Accepted solution
There is no fixed standard of where the connectors plug into the motherboard.
Look for a double row of pins sort of like a small drive data cable header.
If you are lucky, there will be markings on the motherboard as to what plug goes where. Even then, you are 50/50 on the LED polarity.
If the information is not on the motherboard, you will need the e-Machines manual.
Chas
This discussion is closed to new replies.
Trending Software posts
Sort by Trending
Discussion
Useful software Tip or Shortcut
0 helpful
1 reply
1 helpful
1 reply
Question Unanswered
How Are Teams Testing AI-Generated Code Before Production?
0 helpful
0 replies
0 helpful
5 replies
0 helpful
20 replies