Question Locked

What Driver Downloader to use???

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi.
I have An Acer Aspire 3680-2022 notebook I bought used with Windows 7 ultimate upgrade.
It's supposed to have the 3in1 card reader but it's not reading any memory cards.
I opened up device mgr. The icon for mass storage controller needed attention. So I tried to update driver... No driver to update- driver is missing.
I've tried a few driver updaters but they all want to be paid to activate after the initial scan. I don't want to pay for software if I can't use it or it won't work!
What driver installer do you recommend? I'm not officially a tech though I am pretty savvy.
If there is free driver software that I can use without having to pay for registering; It would be even better since I just paid $50.00 for a 16gb flash memory card and I have to buy a replacement battery! But other than all that the laptop's great! So please, no comments about getting my money back!!

Thank You,
CDWright

24 replies

by thechas

I myself ALWAYS download drivers from the system or hardware manufacture.

For this, you should go to the Acer support page and download the latest drivers for the system you have.

One BIG advantage of downloading the drivers from the computer manufacture is that they almost always are tested before being posted. No worries about unexpected conflicts.

Also, keep in mind that the newest driver is not always the best for older hardware.

Chas

by cdwright1

Acer doesn't carry Windows 7 compliant driver software.

by thechas

Well, I would never update the OS on any computer without first checking to see if I can download appropriate drivers for all of the hardware.

My personal rule is that if the manufacture does not provide drivers for a new version of Windows, I will not install the new OS on that computer.

For Windows 7, like XP and Vista before it, Microsoft has an upgrade advisor tool you can run. It does a fair job of identifying both software and hardware that are not supported by Windows 7.

http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

When the non-supported hardware is a scanner or printer, you have to plan on replacing it. At best, you will have minimum function using the default Windows drivers.

I also categorically refuse any Driver updates from Microsoft. I have seen far too many instances of Microsoft Update drivers breaking systems to ever use them.

As to your issue with the flash reader, if the device is not identified by the base hardware manufacture in Device Manager, none of the driver finder programs are going to find a driver. They just will not know what to look for.

The only alternative I use from the system or board manufacture is the manufacture of the chip that is at the heart of the hardware device.

Keep in mind, that a lot of chips can be highly configured as part of the design process and the component manufactures default or development drivers may not work. Plus, for older hardware, even the component manufacture is not apt to update the driver for a new OS.

Chas

by thechas

I just spent some time looking at the Texas Instruments site for drivers or other information.

Best I can determine, the card reader chip is a TI PCI6412, PCI7412 or PCI8412.

I could not find any reference driver software, nor a data sheet for the device.

You might try contacting Acer support. They may have a newer model that uses the same TI controller chip that does have a Windows 7 driver available.

Chas

by oh smeg

But if you look at the Acer Web Site for this model they do not support any form of Windows 7 for this Model which may be part of your current problem.

http://www.acer.com.au/acer/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3112&sp=page15e&ctx2.c2att1=92&miu10ekcond13.attN2B2F2EEF=3112&CountryISOCtxParam=AU&ctx1.att21k=1&CRC=3559666452

As they do not list the actual maker of the Card Reader it's quite possible that it's one of the older ones which is not Windows 7 Compatible or it could just be that they have not bothered submitting any new drivers for Digital Signing as there is no return to Acer in the undertaking because it's only a cost with no chance of recovering any of the outlays.

But having said that if you are using a 32 Bit Version of 7 the Vista Drivers work most of the time so you could always use one of those.

Col

by who am i really

not all card readers can see SDHC,

and not all card readers that support a standard can read larger cards

even recent models made last week don't support all sizes of cards

ie.
my normal SD reader can't read 2GB cards reliably (the documentation states max 1GB cards supported)
my SDHC reader can't read cards over 8GB

_ _

checking the Acer Site for drivers
lists the 3680 as only supported for
- XP: Pro, MCE, & Home
- Vista: 32-bit flavors

the card reader is a TI(Texas Instruments) device
you could try TI for drivers
if you can find the device chip info

edit:
(adding / testing link)
http://support.acer.com/us/en/product_support.aspx?tab=1

link goes to product selector and sets a cookie based on selection

pic (steps in product selector)
http://i832.photobucket.com/albums/zz249/WhatNameShoudIUse/Acer3680.png?t=1293987334

by cdwright1

My system is Windows 7 ultimate. Acer doesn't have any card reader drivers for this system.
I DID download the one for Vista Home Basic, the OS Acer tech told me came on my laptop. Now in computer mgmnt under human interface device you can see the Texas Instrument card, but I can't access it. When I right click COMPUTER, all it shows is my hard drive.
I'll probably go to Microsoft Support and let them remotely tweak on this issue...
But thanks for the heads up about size being an issue (The card!!!) I will put in the sd card that Acer included with my Aspire One netbook before Micro Techs go to work.
Thank You,
cdwright

by who am i really

that's why you can't see a drive in my computer or in computer management

if you put a 1 or 2GB card in it you might see the device work and assign a letter to the card

edit: add info

when a laptop card reader doesn't have a card inserted the drive letter is not assigned, though the device may still appear in device manager
when a card is ejected the drive letter is released,
unlike desktop card readers which assign drive letters to empty card slots and those letters are always available on a desktop

also:
you are using 7 ultimate and probably should try the vista Ultimate driver rather than the home version driver

by cdwright1

Human Interface Device is for my bluetooth usb for my mouse. The TI card is listed under it's own driver. The memory card, when recognized, would be listed right under the hard drive (disc drives)in device management just like it is on my other laptop. (I just realized that!)

by cdwright1

I returned the card for the refund today. Decided that I shouldn't be spending $$ on an accessory that I can't use (yet)...
I have the card that came with my Acer Aspire One. It works in my other laptop,(But not this one) which is Acer Aspire 5515 (I like Acer laptops). I'll use that card to tweak out the issues with this Acer 3680.
My notebook DOES read the Sandisk usb flash.. Do you think maybe my issue is that I should stick to Sandisk products and buy a Sandisk memory card?

Thanks

by thechas

Well, starting over from the top.

The storage controller driver issue has nothing to do with your memory card reader.

The TI card reader chip on my Acer shows up in device manager as "Memory technology driver". Under that is "Texas Instruments PCIxx12 Integrated Flash Media Controller".

Under "Storage controllers" is "Microsoft iSCSI Initiator". Running Windows Update and checking the optional software should allow you to fix the "Storage controller" issue.

You may also need to update the Intel chip-set driver.

When I view devices by connection, the Texas Instruments Flash Media Controller shows up just like it was a PCI plug-in card in a desktop.

It appears that the TI chip runs both the Flash Reader and the PCMCIA socket. The actual driver file for the Flash function is listed as tifm21.sys, dated 2006.

As stated by Who Am I, at least part of your issue is that this Card Reader does not support SDHC cards.

Your only option to use your 16GB SDHC card is to use an external card reader.

If you want to use the built in reader, you will need to find none SDHC cards which will be 2GB or less.

Chas

by cdwright1

It doesn't support SDHC, are there cards that aren't SDHC that it would support? I ran Windows Update but the only thing left under optional updates are the language packs. I already have the latest intel driver on here, according to driver mgmnt when I tried to update the driver. I do have tifm21.sys. dated 2006, so restoring to previous versions is out...

by thechas

You should still be able to find standard SD cards, as older cameras will not accept the new SDHC cards either.

Newegg lists a number of 2GB standard SD cards from $5 to $12.

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007962%20600006188&IsNodeId=1&name=Secure%20Digital%20%28SD%29

I doubt the link will work. Under Flash Memory, expand the option for type and select Secure Digital.

Staples web site lists a PNY 2GB card and a HP 2GB card with a thumb drive.

As to the iSCSI driver, it's purpose is to help you connect to SAN devices. My presumption would be that the "tech" who installed the Windows 7 upgrade did not take care of the iSCSI driver issue either. A version of iSCSI is bundled with Windows 7. iSCSI is an optional add-on for older versions of Windows.

If you don't use a Storage Area Network, you don't need the iSCSI initiator.

If this was my system, I would create a restore point and then uninstall the storage controller from device manager. It should either install on the reboot, or you don't need it.

Chas

by cdwright1

I bought this used from a company that installed the OS and supposedly had their techs look everything over... But who's to say what kind, if any, certification their 'techs' have...
But to be honest, if I could, I'd upgrade any Vista based computer of mine to Windows 7. I have 3. One's this one- 7 Ultimate, one is xP, and third is Vista Home Basic, which I plan on "fixing" sometime this spring!

cdwright

by cdwright1

My other laptop had Realtek installed. Realtek is compatible for Windows 7... Should I install Realtek to this one?? Just found out that my 3rd laptop (ASPIRE 5515)can't read cards- no slot. That's a correction on one of my entries!

by cdwright1

In my earlier reply, I explained that I returned that 16gb card to the store.
I know Realtek came installed on my other laptop, which reads cards fine. When I checked out their official site, I read that system requirements were VISTA/XP/WINDOWS7.
If it's compatible with both my original OS (Vista) and my current OS (Windows 7), what risks could I face that I don't normally face trying to install any random software download?

*Adding my thanks to you and everyone else for trying to help me out and patiently answering my questions!!

by cdwright1

I don't think I should uninstall storage controller; I have virtual pc for xp mode. Doesn't that use the storage controller?

by thechas

I thought you stated that there was an error for the storage controller in device manager.

I would have to research if you need the storage controller for XP mode.

Post back with the specific error or error code for the storage controller.

Chas

by cdwright1

No, it IS for device mgr for sd memory card.
I don't think I have a problem with xp mode yet as I only have it to use my hp deskjet 560c printer which isn't recognized by Vista, according to Microsoft.
I was just concerned that uninstalling the storage controller might make xp mode unusable?

by who am i really

not a Realtek Device

a Card Reader is a piece of hardware
and just like any hardware device it needs a software driver component

the software driver component must match the device or it will not do anything but waste yer time

by cdwright1

Okay,
I wasn't understanding that.. I thought it was TI was the driver for the card. Thanks!

by cdwright1

Was not turned on. I turned it on..
The only thing of interest that I could see is under DISCOVERY tab: (D:) at port 3260 now seems to register, but I still can't access a memory card- SDHC 8gb.
I typed cmd in run and typed (D:) Came back DEVICE IS NOT READY, if that's any help..
Ran command services.msc.
Smart card is auto and started. any other services I need to start? I think I already got the few other services pertaining to memory cards, but I could have missed something...
And when I right click on my DMA I get option to add LEGACY hardware which opens up the Add Hardware Wizard. Should I look for anything there to install?
ALSO- In comparing this Aspire with the one I have that reads the memory card, in DEVICE MGR I'm missing JMCR SD/MMC SCSI disc device under disk drives, and PCMCIA and flash memory devices, It also doesn't have ISAPNP Read Data Port under SYSTEM DEVICES. But I'm not sure if that's relevant.
Is there maybe a way I can copy the files (Via USB flash) and somehow install them to this one? Could that work? I'm trying to locate those folders now, but admitting it's like looking for a needle in a haystack!**
If found, I won't take any action unless approved here first!
Device Manager says all my devices are up to date. I DO go by that rather than anything any driver update software will tell me. But I did run a test scan with DriverWhiz which claims all my INTEL drivers are out of date..
**I gave up looking for those folders for now

This discussion is closed to new replies.