5 replies
It does not matter. You can choose your own. But my advice would be to use a "private" IP range such as 10.x.x.x or 192.168.x.x.
I would also recommend that you DONT use the ICS setup diskette as it doesn't work very well!!
You are better off setting everything up manually.
by relkins
by mphoffar
I think by default ICS uses 192.168.X.X.
The way I usually set it up is
Host PC
IP: 192.168.0.2
Gateway: 192.168.0.2
Remote (or shared) PC
IP: 192.168.0.3
Gateway: 192.168.0.2
DNS: 192.168.0.2
If you want to, you can alsoenter your ISPs DNS addresses on the DNS tab
If you want to see a decent iilusration, go to www.winproxy.com. Although, you don't use their software, they have some good help files that illustrate how to setup connection sharing.
Good luck toyou
Mark
by relkins
by relkins
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending