15 replies
by blackcurrant
I'm not sure that I quite understand what you want to do. If you want to access each machine remotely - sorry can't help... If you are prepared to sit in front of each machine then for W95 do the following:
Right click My Computer
Select Properties
Click the Device Manager Tab
Click Print
In the print options that are displayed you can print a system summary detailing the info you require.
Hope this helps
by niclee
You may wish to try a product called Track-IT by http://www.blueoceaneurope.com/uk/
It results in the Showing the PC's Current configuration / spec. It also lists all software / licence numbers ext... I belive it can be run over a LAN.
Hope this helps
by niclee
by 4u21der
If you can sit down at each machine. Then a quick and cheap resolution would be to use the utilties that Win9x ships with.
Win95 uses
' winmsd.exe '
Win98x uses
' MSInfo32.exe '
Both these utilties should tell you all that you need to know about the PC and you can print the information out if needed.
Hope this free solution works for you.
Good Luck!
by dprivette
Go to Belarc.com and download this free utility. It will give you all of your Hardware and Sorftware specs installed on any machine.
Hope this helps!
by niclee
by ins413
You can do this with the W2K machines. Go into MMC and add a snap in called system information. Double click system summary and there is all the info you need as far as OS, processor, SP (if any). In a nutshell everything that you asked for. Thegood thing about this is that you won't have to go to each machine. This can be run remotely on the other machines running W2K if you have the proper permisiions to do so. Hope this helps.
Ins413
by niclee
Hi niclee,
Most of the information you are looking for is listed by the BIOS in the POST. As the pc
starts the POST, hold the Shift key and hit the Pause/Break button. This will hold the screen for you to get the information on the RAM, Processor and hard drive makes(the size of the drive is usually imbedded in the model
#). Some BIOS's have a have a 2 page POST (Award, AMI). Just hit Enter to resume the POST, just be ready to Shift+Pause on the 2nd
page.
As for the HDD usage, Win95 just needs a right click on the drive and select properties. This will give you a Pie chart and a numerical value of used/free space.
In WinNT and 2000, (I haven't worked much with them on this aspect.) there is a control panel or program that manages the HDD partitions/space that will give you the info you seek.
I wish you well.
Some BIOS will not show the info as I stated above, but will have it inside the BIOS setup
itself. You may need to go in there to get it.
by niclee
by niclee
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending