6 replies
by network5831 Accepted solution
by ron k. Accepted solution
by seanferd Accepted solution
net stop service-name.
But I would try to find out why the problem happens, or if Seagate has an update to fix it or a workaround in their support area.
If it is because a user profile isn't unloading properly, UPHClean from MS might help.
by oldbaritone Accepted solution
Try stopping the service after the backup, while the USB drive is still plugged in. After the service is stopped, then "safely remove" the USB drive.
This can be accomplished using the
net stop (service name)
net start (service name)
A full list of the exact services is found in the registry (run regedit.exe) under the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services key.
Alternatively, you can perform the stop and start using the name that is showed in the Services Control Panel applet by putting the name in quotes, i.e.
net stop "(service)"
net start "(service)"
by ttregilgas Accepted solution
you can script this as well...see
for a good explaination of how to do so.
Net usage is also scriptable, see here
by kenogami Accepted solution
I use a program called System Explorer and it works great. You can find it at Mistergroup.org. It's a free program and has alot of usefullfunctions.
I hope this will help you.
Randy
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending