Discussion Locked

Where are my printers? Their gone!

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
3 HP printers connected with jet direct cards. Shared off the server. Everyday at least once, no one can print. When you look in the printers folder they are not there. Have to shut down the server at least once sometimes twice before they come back. Have tried all of the other suggestions in this forum.

9 replies

by don christner

Have you checked on your Browser Service to make sure that you only have one master browser? The browser service keeps track of what networked resources are available. Every time that the master browser switches to a different machine, it takes upto 90 minutes to rebuild the list of resources.

If you need more details, rate this answer, leave the question open and ask me for more details.

Don

by ann777

Are you using a static ip address for each of these printers? Have you excluded those ip addresses from the DHCP server scope section?

If you are not using static ip addresses and the ip address changes or another computer picked up the ip (because it's not excluded from the scope) address and took it from the printer, then the server will need to browse the entire network for the printers and refresh the browse list. Computers will not know where to find the printers.

Check the ip addresses. Make sure they are configured correctly in Jetadmin. Make sure that they are excluded in the DHCP server.

by sativocomputerservices

We have this same problem in our environment as well. On ething that seemed to help was upgrading to SP2. SP2 supposedly fixed the issues with the printers dissappearing. Thi sis only the case when the printers are not in the same DNS zone as theserver. My suggestion is to upgrade to SP2 and make sure your printers have static IPs and that they are in the same DNS zone as the and you should be good to go. As a side note, we also had this issue with 2000 workstations as well using Novell point and print.

by curacao_dejavu

Are you using jetdirect to manage the printers.?
Problem is that jetdirect is not support for windows 2000 advance server or higher.
Hp has developed a new software to manage their printers.( can't recall the exact name "webjetdirect ?).

regards,

leopold

by ssteen

Thank you this corrected the problem. We were just connecting them thru the Add printer Wizard and select TCP/IP port and put in thier IP's. We removed them from the server, installed the WebJet Direct and have not had one problem since. Thanks

This discussion is closed to new replies.