Discussion Locked

Who is making the list of dumb users 2003? Got a hot one.

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Respond and I'll give the short story. Two of us laughed so hard for about 15 minutes and almost split our guts on it. This lady is classic, but this one takes it all.

16 replies

by littledragon

Okay, this is an old one, dating back to the days of dumb terminals, but I swear this is not an urban legend - it is a true story because I took the phone call! The user called and said her terminal wasn't working. We went through the usual list of twenty questions, and couldn't figure out what was wrong. Finally I asked her what the last thing was that she saw or did on the terminal. Her reply "I watered my plant." Nothing more to be said....

by finmedmgr

I am looking for the person who puts these together, know of anyoneor did I draw the short stick?

by bogomir

my company replaced all of the remainig 3270-Terminals with PCs+a 3270-emulation sw.
The users also got a network-printer mapped. Now one of the not-so-pc-concious users wanted to print something from his Host-session, but the print didn't appear on the Kyocera FS1800, so he hit the print-key several times, and went home in frustration. That was friday. When he got back to work on monday, the printer operators from the docu-center (located in our basement) had sent his printouts from last friday up to his office door - 200lbs worth of fanfold paper. The report he was trying to print was several 100 pages, and he must have hit the "print"-F-key several dozen times...

by bogomir

working for my former employer, I was responsible for the repair shop (4 people). One day we got a PC for upgrading. When I picked it up from the desk to carry it downstairs, I noticed a dull rattling sound inside - obviously something loose. Now we had a number of cases where a loose mainboard screw inside killed the PC, because of short circuits the screw caused... so I tought "uh-oh..."

Opening the chassis I found a bone-dry bread roll! The funny part is, the original tape seal from the m,anufacturer was stilkl on the chassis - I broke it in the process.
Somebody on the assembly line must have missed his luch... :-)

by hal 9000

Was a customer who insisted on a call out after having his computer repaired with the coment that the printer was no longer working. I went through all th eusual questions and got nowhere so I went out to his house to investigate as he urgently needed something printed out for his job.

Once I got there he whent to great lengths showing me exactly what was not working but when I had a look at the print que there was one item there that he had scanned in and enlarged 800% well beyond the A4 size of the printer so it wasn't printing and everything behind it was waiting for the first item to be deleted before it could print.

I asked him what else I could delete but was assured everything was important so I just let the thing print of 250 copies of the same thing that he had obviously tried to print once the first item failed to get through.

by flemminginc.

We had a trainee staying in our workshop for three weeks. He had just bought a new PC and he brought it in 'cause he wanted to add a second harddrive and reinstall xp.
The PC was open and the xp installation was up an d running, formatting the new harddrive. The trainee decided he wanted to clean his PC, so he grabbed an aerosol can containing a product made for cleaning printers and desktops, and he gave his motherboard a good spray.....need I say more
:)

by leaffan_ca

I received a call the other day. The caller said that he was unable to connect to the Internet after moving his pc. After asking the usual questions: Was he using a router or hub? to which the answer was no, I asked him to run ipconfig and got a 192 address. Well, imagine my surprise when I asked him to trace the coaxial cable and the user said it was connected to the wall through his VCR!

by hal 9000

The best one that I can rember is selling a modem to one guy who returned it saying that it didn't work. So I tested it and found nothing wrong and gave it back to him. Well two hours latter I got a really nasty phone call from this guy and he insisted that I come and connect the modem so he could use the internet. Well I wasn't all that impressed but I thought that it might save some nasty actions from this person so I went down there only to find the modem and an ISP instaff disk and the disk said that to connect to the internet all you needed was this CD and a modem. He couldn't quite figure out how to connect the modem to the Audio CD player and get a picture on the TV but he was sure it was possible because the little piece of paper said he could get an internet connection with the CD inserted into a CD player and the modem.

That one is still at the top of my list of stupid home users.

by emj

We had a receptionist where I worked who was very sharp...in some areas. She was famous for making things out of nothing, and reusing items where she could. One day, I went to her computer to do an install, or something, and noticed that her mouse was REALLY sluggish. I turned it over to clean the mouse and discovered some sticky substance surrounding the roller and cover. I asked the receptionist what it was, she replied, "Glue.". Resisting a smile, I asked her why there was glue on the bottom of her mouse and she told me that the ball kept falling out of it so she decided to glue it to keep the darn thing in there. I had to explain to her, as gently as possible, that while it certainly kept the ball in place, it kept the ball immobile too. I gave her a new mouse, and cleaned off the old one with alcohol. The funniest part of this whole story is that she just didn't understand why it wasn't a good idea to glue the ball in place. That one still leaves me smiling. :)

by finmedmgr

I know it's been a long time since I re-visited this, but thought you should know I haven't laughed so hard in years

by jaqui

sitting in reception area of an office.
the receptionist had a typewriter return bar attached to the top of her monitor.
( velcro strips, with a 360 degree swivel in the return bar )

she was typing away at something, glancing up and to the right regularly.

reached up and smacked the return bar then right back to typing.

I fell out of the chair I was laughing so hard.... blonde receptionist.

by rock lobster

A customer of mine had just installed a new high speed CD R/W, and had made his first CD with it. After making the CD he decided that he needed to label it, but he had no proper CD labels on hand. He therefore decided to use a standard Avery address label, and placed it near the outer edge of the CD. This is not good. I recieved a call from him later - he was freaking out saying that his computer had exploded. I went to his office, and sure enough, most of the front bezel of his computer was destroyed. The amazing thing is that he had a whiteboard on the wall behind his desk, and there were very small sharp shards of CD rom sticking out of it. My customer also had a few small cuts on his face and arms that were caused by the CD when it flew in to a million pieces at high RPM. I dont think this guy would understand why tires need balanced either........ Sheesh.

by rbarnett09

I had a user call me one day right after she returned from vacation. She stated that there was a "random buzzing noise" comming from the back of the computer under the desk. So I'm thinking it's probably just a fan. I go to check it out. While at her desk I too noticed it. It would occur about every 2 minutes and last for 30 seconds. buzzz, buzz....2 minutes....buzz buzz. You get the point. Well I stuck my head under the desk to listen closer. At that point I realized that the sound was now comming from above my head. I looked in her desk drawer and found her pager set on vibrate. When she returned to her office I told her that she missed a few pages and that the problem was solved.

by cglrcng9

A middle aged to senior (usually a "with it" type), female home user customer asked me to look at her floppy drive as it wasn't working on 1 of my usual maint./update, AV check, & spyware clean-up trips. I inserted a floppy disk known good. Sure enough after multiple tries (though it showed up in "My Computer" as a recognizable installed and working drive...It simply wouldn't work/spin the foppy disk up.

A quick flip of the drive door and a flashlight showed the simple but very strange problem...A Visa ATM/Check card had been inserted as though it was an ATM.

Upon her return (she had run out to grab some groceries),...I casually asked her if she had ever attempted to make an online ATM/Credit Card purchase using the computer. Her sheepish look & quick exit from the room told me everything I needed to know....She returned & fessed up a few minutes later (It was an attempt to re-subscribe for her annual Norton AV subscription months earlier), and stated she wondered where that credit/ATM/Check card went. I couldn't help but break out laughing. At least she tried!

I laughed all the way back to the shop and often snicker about that one every time I think about it. The floppy drive was fine...But I thought about calling her credit card company to tell them about the found card. I didn't, but I sure was tempted.

by alangeek

A few years ago I was working in my upstairs office at home when my wife called up to me that she was trying to install a program for the kids on her PC and it wouldn't read the CD. I told her to eject it and make sure that it was right-side-up and that it wasn't scratched or dirty.

She responded that now it wouldn't eject the CD, either. I asked how she was trying to eject it; she was right-clicking on it and selecting "eject". I told her to just push the button on the front of the drive and it should eject.

After several minutes, I asked if everything was OK now. "It still won't eject," came the response. I asked, "Did it do anything when you pushed the button?" She replied, "No, it doesn't have a button. I turned the lever, but it won't come out."

Lever? I've never seen a CD drive with a lever, so I decide I'd better go down there and see what's going on. Bear in mind that this is the PC she's been using for over a year, and she has installed packages from CD by herself in the past.

It turns out that she had inserted the CD in the 5-1/4" floppy drive and turned the lever to close the drive on the disk, though the drive is no longer connected, it's just sitting in the bay. She turned the lever to open it again, but since it's a CD, not a square floppy, the drive doesn't eject it.

Once I've seen what's happened, I can barely keep from falling on the floor with laughter. I had to shut the machine down and disconnect all the cables to pull it out from under the desk, lay it over on its side and tip it forward to roll the CD out, fortunately without damage.

By the way, did I mention that my wife has a Master's degree in Mechanical Engineering, holds a Professional Engineer's license, and is an automotive engineer?

This discussion is closed to new replies.