5 replies
by gary56789
If you install four 1GB memory modules the system may only detect a size between 3GB and 4GB because of memory allocation for the devices in your system per PCI specification. On a 32 bit architecture, 1 process is not able to allocate more then 2GB. However, if you have a memory hungry app (like Photoshop), you can set XP to shift 3GB to the App and 1 GB to the OS. See the following link for instructions
http://searchwinsystems.techtarget.com/tip/1,289483,sid68_gci1108831,00.html
Hope this helps.
by y.palagin
by matt.altman
32bit windows can only address 3.25GB of memory as it is using all 32 (bit) address lines, 64 bit o/s do not have this limitation.
wwww.FreeHomeSoftware.co.uk for free software legally!
by madyogi
You have 32 bits to create pointers in memory so you do have 2^32 = 4GB. 80386DX and above have (so called) segment registers and they all are 16 bits long (only). First two bits aren't used so you got even less of them (14). BUT if you put it all together to build an address you got
{segment (PAE)}:{offset}
{3f ff}:{ff ff ff ff}; round it to the full:
40 00 : 00 00 00 00 in HEX. In DEC you get:
2^14 * 2^32 = 70368744177664.
1024B * 1024B * 1024B = 1073741824B (1GB)
1073741824B * 1024B = 1099511627776B (1TB)
1099511627776B * 64 = 70368744177664B (64TB)
You realy don't need 64 bits architecture to get something hidden far away in memory.
Hope i didn't do bad math here... ;)
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending