7 replies
by dinkey Accepted solution
by dmritchie2 Accepted solution
by robo_dev Accepted solution
Can you get into the BIOS setup screen? (HIT F10 during HP logo)
If you can get into BIOS, then reset it to factory defaults.
The DV9000 has the legendary nVidia video chipset fault, which was part of a class action lawsuit (that closed in 2011). My experience has been that most of the time when you have a HP desktop or laptop that won't boot, it's the nVidia GPU that's the fault, and since it's a laptop, that means a new systemboard or some careful reflowing of the GPU solder connections.
by Wizard57M-TR Accepted solution
Such as an emergency recovery CD, USB thumb drive or external hard drive?
It sounds like something could be amiss with the hard drive or other components,
so booting with emergency recovery media gives you a chance to check everything
and see if it can find what is not working...could also be failing RAM, power supply, etc
by optimusdad Accepted solution
by oh smeg Accepted solution
If the NB passes the Power On Self Test or POST it should make a beep noise. If it doesn't make any Noise or a series of Beeps that is a Error Code and we'll need to know what the serries of beeps is to diagnose it.
You can also try a Boot Disc like the Ultimate Boot CD available free here
http://sourceforge .net/projects/ubcd/
[i]remember to remove the space from between [b]sourceforge[/b] and [b].net[/b] for a working link.[/I]
The Ultimate Boot CD is a Free download which you can burn to CD or make a USB Boot Drive from and then run a series of Diagnostic Tests from it.
Also was this unit covered by the Recall of some dv9000?
Col
by dinkey Accepted solution
Sorry it took so long to reply. Been busy.
Well, I had let it sit unplugged for about a day and a half. Noticed that the bottom around the fan was getting kind of warm. I blew the fans out with duster. Yesterday I turned it on and it booted all the way to the desktop. I did a few updates. When it went to restart it blanked out at the logo screen again. Left it off all night tried again this morning still the same HP logo pops up then black. As far as noises go all I hear is the fan. No beeps. I've set to factory defaults in the bios. I ran a hdd test from there as well. All looks fine on that end. I noticed the cap locks key stays on the entire time when the screen is black. I tried hitting the caps key to turn off but it wouldn't.
Thank you for your time and help.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending