3 replies
by ptreadway
It seems that the wireless card is not able to establish a proper wireless connection with the router/access point. Please follow the steps given below to resolve the issue:
1: Try changing the channel on both the wireless connecting devices.By default the two would communicate on the channel no.6.You may change it to 1 or 11 {these are non interfering channels}.
2: Check for any devices or home appliances that may be causing interference with the connecting devices.
3: Verify the connectivity with the devices placed close to one another.Disable WEP encryption at the initial stage of establishing connectivity.The link may have lower speeds due to overhead because of encryption.
4: Try with the short preamble instead of the long one.You need to make this change on the base station as well as the adapter.
Hope this helps.
by mcintyrem
After reading your message, I did some more trial and error experimenting. My access point was already using channel 11, but I switched it to 6 and removed the encryption. That seemed to work with no problem. Though, I wasn't happy about removing the encryption settings. Thus, I tried a few more changes, creating a new network key and setting it to automatic. In short, I finally got it working the way I want it too. Thanks for the tips.
by mcintyrem
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending