Discussion Locked

Wierd graphic card fault?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone,

I have fitted an existing hard drive into another machine, (as master no slave involved)obviously they have different motherboards, everything was O.K. until I found the graphics card only showed 16 colours, I installed the correct drivers for it off the supplied CD and it still would not work, I took out the original video card out of the machine that the hard drive came from and installed that, still no Joy.

Can anyone shed any light on how I can get around this problem, I have removed the card in Device manager and installed a new video card (sis chipset) and this new card will not configure. The new motherboard is a QDI advance 9. The old motherboard was a jetway 542.

Thoroughly Pissed off Pete

Ta in advance.

6 replies

by jwood

Pete:

Try the following:

1) Using add remove programs in windows remove any software related to the video card

2) Using REGEDIT delete and keys associated with the offending video card.

3) Restart the machine and have your device (video card) drivers handy.

( You should also make sure your BIOS setting are correct; ie which video to init first, etc. )

Hope this helps--

Jim

by csmith

Remove any Video Card in Device Manager.
Reboot, check BIOS is set to PCI Primary for Video, not AGP. (I assume this is a PCI card)
Reload drivers.
Regards, Chris

by csmith

Also remove the card with Remove Hardware (under Control Panel)
Regards, Chris

This discussion is closed to new replies.