Question Locked

Will initializing my eHD delete all the info on it?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Recently my external hard drive (500 gb My Passport Essential by Western Digital) was dropped onto the floor, and it began acting funny... When I plug it into the computer, it makes a clicking noise a few times, then Windows gives the alert sound that a USB device has been plugged in. I cannot see the device in "My Computer", however, when I open up disk management, I see the hard drive listed as "Disk 1- Unknown - Not initialized". I know this means I need to assign it a drive letter, but it also means I need to "initialize" it. Will this mean deleting all of the ever so important data that is on it? I realize that my drive is dying soon, and if I do get it to read again, backing up is the main priority. I haven't much experience with these external hard drives, as this is my first time owning one. I appreciate any help given.

By the way I am on a Windows Vista operating system

7 replies

by seanferd

Which you may not want to do. Windows is seeing the drive as a new, unformatted drive.

Yes, there is definitely something mechanically wrong with it, and even turning it on may be causing further damage. You could possibly even be looking at expensive forensic recovery if the data is important.

If the drive is physically broken, initializing may do nothing anyway. But if the drive is removable from the external case, you might try seating it in the computer as a slave to see if it is readable.

The absolutely best piece of advice I personally can offer is to contact WD. And do not power on the drive unless you have a plan of action.

by oh smeg

But by your description the drive is on it's way to Silicon Heaven. If there is Data that is [b]Important[/b] and must be recovered I would say pack it up and send it to a Data Recovery Specialist who can work with dead Drives.

If the data isn't important and would only be nice to get back you can try initializing it but I very much doubt that it will do anything useful.

http://support.wdc.com/product/download.asp?groupid=612&sid=2&lang=en

The full destructions for WD's Data LifeGuard are available here. ;)

http://www.wdc.com/en/library/other/2779-001005.pdf

Col

by santeewelding

You do as Col does: you inscribe on clay tablets, fire them, and bury them out back.

Seriously.

The masses only now discover the meaning of the words, "data" and "serious". This goes further back than Gutenberg. Back further than the Sumerians.

How much "data" do you suppose is enshrined in Stonehenge, or, the pyramids? Or the stele discovered in the movie, "2001"?

How does what you have compare?

Do you see what I mean by, "important"? Learn the meaning of "important" before you trouble others with banalities.

May be that "important" is what lies between your ears -- not some stupid drive.

by johnneh

...yeah that was really useful.

but to the other two who replied, that's what I feared I'd have to do (take it to an expensive recovery place), and was prepared for such. (of course not financially, yet )

well, thanks all

by santeewelding

I don't do quick and dirty.

Quick and dirty is what did you in, to begin with.

by ic-it

HDD Regeneraor works very well, but is not free.

MHdd32 is free and also does a nice job.

Download this ISO, create the CD, read the documentation, and let it run a few loops.
Set the program to repair and conduct a loop test. Let it run at least three times through. I have had a lot of luck recovering drives with this program. (I have no affiliation with them).

http://hddguru.com/content/en/software/2005.10.02-MHDD/

This discussion is closed to new replies.