Discussion Locked

Win 98 long pause before GUI

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a machine that seems to load its' startup files fine, however, it pauses on the clouded Windows 98 screen for about 4 mins. before it gets into the OS. I went through the Step by Step confirmation and everything seemed to load fine. The machine just started doing this (within the last week) and nothing new was loaded to it.

Any ideas would be greatly appreciated.

Thanks.

11 replies

by saihib

It sounds like some apps that launch at startup. Run msconfig and under the startup tab uncheck every box (make a list of what was checked, though) and reboot. This should speed things up. It will also speed up your shutdowns.

by dcassat

I saw this for the first time 2 days ago. I tried everything I could think of. I did disable all of startup programs as the last post suggested with no luck. I replaced the registry with an earlier version and it worked except for the fact that it was just too old a version. I had to reinstall Windows to fix it and it works well now.

Good Luck.

by kenone

Did you answer "Y" to EVERYTHING in the step by step startup?? What is in your "Startup" folder? Is this machine on a network?

by zepp

It could be that there isnt enough memory.
The more memory you have the faster the boot up.Hope this helps.

by big ray

If the computer is on a network, it could be the network. Remove the network card and boot. If it boots ok then it is the network. A lot of times I have seen the PC hang on the cloud screen because the NIC is polling or being polled by other resources on the network, most likely a domain controller or server. I think it all depends on the NIC you use and the options on the card that are configurable. Try changing the duplex and speeds of the NIC. Also check the cable, maybe the problem isbeing caused that the PC is sending out a packet that is being lost because of a bad cable. It knows there is a device on the other end, so it keeps trying until it gets through.

This discussion is closed to new replies.