Discussion Locked

Win NT Server 4.0 Reinstall

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When Reinstalling NT 4.0 (3.51 upgrade version) the process stops with

-No previous version of Windows NT could be found on your computer. Setup is unable to verify that you qualify to use this upgrade product. Press F3 to exit.

Inserting 3.51 CD at this point does not help
Copying all 3.51 files to directory on boot drive does not help.

Has anybody gotten past this without installing 3.51 first?

12 replies

by spydergst1

The install may be looking for the winnt directory. If you installed 3.51 to a different directory other then winnt this could be the problem. I recommed running the install from the 3.51 os not from boot diskettes.

by pismire

Currently running NT 4.0, Trying to reinstall NT 4.0 from 4.0 upgrade CD.
Can't boot form 3.51AM using winnt dir.

by jsoto

You need to start your computer on 3.51 OS, then Run the upgrade from there, run Winnt32.exe located in the i386 directory.
Use s switch like this Winnt.exe /b to avoid using the floppies.

Good Luck

by vue

Can't use the upgrade CD, if You already running nt4.0. Use the real NT4.0 CD, not upgrade. Upgrade is looking for nt3.51 install and if not it will stop.

by pismire

That answer is straight off of a microsoft tech. document. This answer + $695.00 for a CD with the "real" NT 4.0 may have helped. Thank you.

by pismire

I Did not provide enough info on this question. Turns out I had a SCSI CD ROM
that required a driver to be added during the install. After that the install read the file it needed from a NT 3.51 CD.

by schitzoid

during "inspecting your computer", choose f6 to tell it you need to install scsi drivers

by pismire

This guy is the winner although I posted the answer to my own question over a year and a half ago. Good thing I wasn't holding my breath

This discussion is closed to new replies.