Discussion Locked

win2000 pro missing password

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently purchased a few HP Omnibook 4150's from a local auction, for a bankrupt company.
One had windows 200 pro installed, but no one remaining at the company was any help as to the password or any idea how to resolve booting the system into windows. I tried my windows 2000 pro CD, and boot disks, to no avail. It has swapping floppy or CD options but I can NOT boot from floppy to start CD.
Is there anyway to get around the password shy of fdisk, but then I have no way to install my Win2000 pro! ?

7 replies

by pahosler

You should be able to set the BIOS to boot from CD or floppy. I am not sure of a way to bypass the administrator password, but you can always try guest with no password, I have gotten into several Win2000 boxes this way. You will be limited to what you can do unfortunately. There are probably some good hacks out there to bypass the password, it is still windows afterall.

Paul

by doclove

a little too basic, doesnt understand the laptop. I have booted from floppy for dos, or it boots to windows, with 3 domains 1 being the user and only lists his name which requires his username and password. I can not create a new domain or username within existing domains requiring a known password. Guest under existing domains and no password DID NOT work.

by joseph moore

Yes, there is a easy, and fun, way to hack into NT and 2000! Here are the steps:

Install an alternate copy of Windows NT (or 2000 Pro) on the same partition (in C:\WINNT2 for example).
Boot up the alternate install.
Use Start / Control Panel / System / Advanced / Startup and Recovery to change the default boot instance to your original install.
In the original Windows NT folder (C:\WINNT), navigate to the \System32 sub-folder.
Save a copy of logon.scr, the default logon screen saver to logon.scr.old.
Delete logon.scr.
Copy CMD.EXE to logon.scr ("copy cmd.exe logon.scr").
Shutdown and restart your original install.
Wait for the logon screen saver to initiate (takes 15 minutes; don't hit a key or move the mouse). It will actually open a CMD prompt, in the security context of the local system account. Be patient, it sometimes takes several minutes for the command window to popup.
Type MMC, into the CMD prompt to execute a blank MMC. Then click Console -->Add/Remove Snap In --> Add. Add the Local Users and Groups snap in. Click OK until it is open.
Go to the Admin's account and change the password.
Close MMC, and login with the new Admin password.
Delete the logon.scr from %SystemRoot%\System32.
Rename the saved default screen saver (logon.scr.old) back to logon.scr.

Fun, huh! After this, you could delete the entire WINNT2 folder, and remove any reference to this second installtion from BOOT.INI.

Here is a URL that talks on doing this, plus a couple other ways of hacking into NT/2000:
http://is-it-true.org/nt/atips/atips262.shtml
(please remove any spaces)

Hope this helps.

by shanghai sam

Thanks Joe,
I did manage to get booted by inserting username in all caps "ADMINISTRATOR" and no password. I will work from there to try the answer 2 n 3 to see what I can do to remove the old lan domains and all passwords.

Thanks very much to all for helping

Ed

by xanderoth

If the boot partition isnt NTFS- you can download l0phtcrack for free at l0pht.com (thats a zero, not a letter O)

Then just boot to a windows98 floppy, copy the .sam files to a disk and run l0pht on another computer to hack the .sam file for NT/2k passwords. The .sam files are sometimes called .sa files, also can be found on most rescue disks- if you have em for that particular machine.

If you cannot get into the boot partition outside of the actual OS, then forget it. :)

by shanghai sam

Thanks Xanderoth,
I did manage to get booted by inserting username in all caps "ADMINISTRATOR" and no password. I will work from there to try the answer 2 n 3 to see what I can do to remove the old lan domains and all passwords.
And yes the filesystem is FAT32, I will try it to see what happens.
Thanks very much to all for helping

Ed

This discussion is closed to new replies.