Discussion Locked

WIN2000 Upgrade

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I use WIN2K upgrade on a desktop that's now WINNT4.0, when it upgrade to NTFS5.0 will this allow me to increase the size of the "C" partition without completely reformatting the harddrive?

3 replies

by vinnyd

win 2k can not change the size of the acutal partition. However, there is an option that lets you span across partitions. You can add a second partition to the first. To the user is all looks like drive C.

Another way to do it is with Partition magic.
Just make sure that you backup drive(s) in case something goes wrong.

by expertpc

Spanning can only be done on freshly created Dynamic volumes in Windows 2000, And never on the system drive!

Your best bet is to use Partition Magic 6 and a new larger drive. Use PM6 to copy the partition over to the new drive and specify how large you want it to be (new drive size).

Note: If you have already upgraded to Win2k and then upgrade the drive to Dynamic Disk, leave at least 10-20 megs unpartitioned space at the end of the drive for Dynamic Disk info space.

Good Hunting!

by bob.koper

The workstation in question has a 10Gb harddrive, but we can't effectively use some of the programs we need to use because of the 2Gb limit imposed by WINNT & NTFS. This is what we are trying to remedy with the added RAM and WIN2K

This discussion is closed to new replies.