Discussion Locked

win2000pro hangs

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

windows 2000pro machine hangs when working in application.
is on a windows 2000server domain.
software=pastel(accounting), office 2000, norton antivirus 2002.
hardware=intel vc820 m/b, 128mb rambus ram

4 replies

by thi_ca

Normally, it can be caused by Hardware conflict such as NIC and Video card 's IRQs.
Goto Control Panel, check System to make sure no confliction there.

More than that, lack of Hard Drive space whereas its Swap Area location can cause it too. Try to remove unused programs and other *.tmp, *.bak, *.sav, and/or *.bmp files. Scandisk, and disk 's defragment will surely help the system running smoothlier.

Hope my two cents suggestion works for you.

by jezze

After installing and troubleshooting win2k for some time, I will suggest the following points:

1.- check your CPU fan. Make sure it isn't making any strange noise and its RPM is at least 5000 RPM (you can check this on the Hardware Monitor optionof your BIOS).

2.-Make sure the CPU temperature does not exceed 40C /100 F.

2.- Check your "Administrative Tools" "Event Viewer" "Application Log" for error messages. The answers can be found on the Windows 2000 support tools included in the Win2k CD.

3.- Finally, reset your memory modules and make sure your using your BIOS default settings.

I hope some of these steps work. Good Luck

This discussion is closed to new replies.