Discussion Locked

win2000pro vs win98

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

have a win2000server domain, with win98 machines and one win2000pro machine.
the win2000pro machine cannot see the 98 machines on the network and the 98 machines cannot see the win2000pro machine.
all of them can see the server.
Question: Can youtell me what seems to be the problem

8 replies

by robert schommer

Check your workgroup/domain names. They must be the same. Also check and make sure the win2k pro machine has a valid machine account on the domain.

by rcl

I would say you need to check what network services your running, i.e. WINS, DNS, and check that the clients TCP/IP settings are looking for them.

by jlstrader

Make sure that you networking for MS networks installed and running. A common mistake that some make is that they use the netware instead and do so not thinking and in a hurry.

Try right clicking your Network Neighborhood and then properties. Make sure that the box that the priamry logon is MS networks and then click on "Client for MS Networks" at the top and select properties. That screen will be self explaining. Good Luck. I could really use the points so I can ask a question. Thanks, John

by csotocastro

I think it?s a matter of protocols. do u have the same protocols (TCP/IP, IPX/SPX, NETBEUI) on the win9x and win2kpro?
the win2kpro and win9x machines are in the same domain, workgroup?
are the clients machines in the same network segment? Hope itcould help.

This discussion is closed to new replies.