Discussion Locked

Win2K and Switching Domains

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Using Win2K Pro on a Laptop. The user works half the time at his Office, and the other half at a customer site.

The problem is that the user has to register his system on both domains.

If the system is already registered on a Domain, and tries to re-register because you are switching back from a different Domain, the original Domain wont let you because it thinks that the system is already registered and refuses the request.

The only way for the user to get the system properly registered is to contact the Network Admin, and have the systems Domain registration entry removed every time they switch Domains.

Is there any way around this?

Any help would Be great.

7 replies

by spunkmnky

Try typing in his full domain name (ie domain/username) at the login prompt. If the user and computer are already part of the domain there shouldn't be any conflicts.

Later

by squirejoe

The problem is that you have to re-register when you change Domains, and if there is an entery for the system, then it refuses the regestration request. You also have to remeber thjat different Domains usualy have different Network Settings....DNS, Wins, DHCP,.......

by ped

hi, i would create a roaming profile for each location:

To create a Roaming Profile:

1>In the System tool in Control Panel, click User Profiles, and then select an existing user profile.

2>Change the type of profile by clicking Change Type. Select either Local or Roaming.

An existing User Profile can be copied to another user's account by following these steps:

1>In Control Panel, double-click the System icon.

2>Click the User Profiles tab.

3>Select an existing local or roaming profile that you want to copy.

4>Click the Copy To button.

5>Under Copy Profile To, specify a UNC path to the user's profile folder, for example:

\\ServerName\ShareName\User'sProfileDirectory

-or-

In Network Neighborhood, select the user's profile directory.

6>Click Change in Permitted to Use to select the user that will be permitted to use this profile.

Note that if you are using a Windows 2000-based computer, verify that you are not choosing users or groups from a Windows NT-based domain because Windows 2000 is designed to use Active Directory to select domains.

7>Click OK to copy the profile.

8>Click OK to close System properties.

9>The user's account will then have to beupdated to reflect the path of the roaming profile. This is done in User Manager. Double-click the appropriate user's name.

10>Click Profile, and then type the UNC path from step 5 for the User Profile Path. Click OK.

After the user has successfully logged on, the profile will be saved on the server as a Roaming Profile, and any profile changes will be saved to the server.

if your need help with this email me.

by squirejoe

We don't use Roaming Profiles on our Network. And this would only work if BOTH domains were using Roaming Profiles, which vary between Customer Sites.

by bentgellerich

What about installing another copy of 2000 on the laptop? Then join the customers domain with the new installation. Edit the Boot.ini and replace the entrys with a friendly name. This is assuming he has only one customer site he works at. This would be the last solution to try since it wastes disk space, but none the less might be a simple solution.

by squirejoe

Yes and No....Dual Boot is an option, but there are the issues of shared files. We would have to have 2 complete installs and a 3rd partition that would keep all their documents. This third partition would have to be a FAT partition, and that can be a security issue.

This discussion is closed to new replies.