Discussion Locked

win95 memory limit

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

15 replies

by dmiles

Check the mother board manufacturer it will determine the memory limit,I am using Intel 440MB,with a 66mhz bus and WIN98,with 128mg memory and this is my limit due to bus speed.

by jlessick

Windows 95 can address up to 4 gigabytes of memory, but in reality you are limited to what the motherboard will hold.

by msillers

Since I'm not sure what the question is, I'll relate an incident I ran into a while ago.
I had a client who installed an older windows application. This application overwrote the HIMEM.SYS file in his Windows directory with an older version. HIMEM.SYS is loaded as part of the Windows 95 boot procedure. This older version forced Windows 95 to only recognize 16M RAM. By replacing the file with the version that came on the Windows 95 cd, Windows was able to recognize all the physical memory on the computer.

by shane

While Win95 can address more memory than 64MB, the motherboard chipset may be more of an issue than the OS. If you are using Intel 430tx or earlier, it will only cache the first 64MB of memory. Since Windows uses memory from the "top" down, installing more than 64MB of memory on one of these systems will seriously degrade performance.

?h?n?

by avidetto

win95Beta,& release One, 32 Mb mem requesetd, 64 max, the first two releases of the OS can not use this memory due to the fact it is a 16 bit OS running over dos. However, witht he 32 bit version of the 9x clients this issue was resolved. Also the age of the motherboard is a factor. However, reguardless of the release the issue is not will the memory be read or be effective, it will, the page file that is created can not use over the 64 threshold.ie, 64 +11 (auto in a 9x client, has be be set manual on a Nt box) and x2 for the top end, or 128.). This does not mean that the extra ram is not used, it is however it is not used for the VM, just as 'extra' ram. One suggestion is that you make sure you have last release of windows, or download 95's windows autoupdate from microsoft. You will then be able to upgrade the os, for free, to an more current form. If you already have done this, use the ram, it will read it & the page file will be larger than the 64 limit..fyi, the threshold for Ntwas corrected on SP3

This discussion is closed to new replies.