Discussion Locked

Win98/2k peer to peer network/ICS setup

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Scenario:
Win98 desktop with 2 NICs. One connected to @home cable modem. Other connected to hub. Win2k Pro laptop with 1 NIC connected to hub getting IP address from DHCP (Win98 ICS).
Win98 has ICS installed as well as Client For MS Networks and TCP/IP. Win2k has same MS Client and TCP/IP. Can brwose internet on both machines fine. Cannot connect to other computer though. To transfer files, I'm having to use FTP right now. Need to share folders. I type \\ or <\\ in Run box and get error "Cannot find network name/address" - this happens on both machines. But I can ping both machines (with private IP). Win98 primary login set to Windows Login. Does it have to be set to the Client? How do I set this up to share theinternet connection and share folders?

9 replies

by onurzaim

Your problem may be encountered from different types of Operating systems ar double Ip usage. Check your network settings and try to use one IP adress.

by mr. origami

Uh - no. Win98, WinME, Win2k can all participate in a peer-to-peer network. One IP address is not possible as the host machine must have 2 NICS - each with a unique IP address. (1 public for the internet connection and 1 private for the LAN side). Thanks anyway.

by spank

If you're going to set up a peer-to-peer network your logon for the 98 machine needs to be Microsoft Client. the ability to ping the win2k machine just shows you that you have a good physical connection. Good luck

by mr. origami

Nope. With the MS Client as the primary login it still doesn't work. Both machines are part of the same workgroup (@home). Win98 cannot browse network at all (errors) and Win2k can't see Win98.

by grantcom

I personally prefer to use static IP addresses and find less problems in doing so. I set the access (host) machine as 192.168.0.1 and set the others .2 .3 .4 etc. On the client machines set the gateway to 192.168.0.1 and under DNS configuration set the clients "host" name using each machines ID (computer name) exactly as it appears in properties, Domain can be left blank. In fact I generally copy and paste this info to be sure it is accurate...it is case sensitive. Then under DNS search order put 192.168.0.1 Of course you should go into the Internet Options of the client machines and set to never dial a connection and lan settings should be checked to automatically detect settings. The host machines Internet Options should be set to use the lan (for cable)and sharing should be enabled. Of course there are security issues envolved in being "always connected" and a firewall should be installed. I like ZoneAlarm (www.zonelabs.com) and it is free.

In regard to the network failure. First off I cannot stress the importance of making certain that all machines are given the proper Windows CD when setting up networking. It has been my experience that mixing versions will cause browsing problems. Secondly, I also set each NIC to the proper speed, not autosense. Of course the NIC connected to the cable modem must be set to 10 mbps. If the other cards and hub etc are capable of 100 then set those to 100 not autosense. Also, I would set the desktop to be the master browser and set thelaptop to disabled. In regard to which logon I have heard that ICS requires MS Network logon...I have my doubts but have never tested to see if this is true or not. I do know that if networking it is fine to set to windows logon as long as under "Passwords" the "User Profiles" is set to "all users use same settings etc."

Hope this helps...if you need further direct help feel free to email me at grantcom@bellsouth.net

by grantcom

A further note...as you know Win2K Pro also has ICS therefore, make certain it is not running on this machine as only one ICS may run on the network.

by grantcom

In going back over your post it is not clear that you have shares set up on each machine...this should be done. However, this is not the problem with your error message i.e. cannot find machine etc.

by mr. origami

Thankfor for your response. It is my understanding that Win98 ICS works as a DHCP/NAT server - so I don't know that it's possible to set my LAN NICs to static IPs. In any case, I finally got it to work by adding the IPX/SPX protocol to both machines and binding it to the laptop NIC and the Win98 LAN NIC. By the way, ICS was working fine when my primary login (on Win98) was Windows Logon (not the MS Client).

This discussion is closed to new replies.